echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > 12 industries in Dongguan, Guangdong are included in key VOCs control industries

    12 industries in Dongguan, Guangdong are included in key VOCs control industries

    • Last Update: 2021-07-19
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    Global Coatings Network News:

    Global Coatings Network News: Global Coatings Network News:




    A few days ago, the International Energy Conservation and Environmental Protection Network learned from the Environmental Protection Bureau of Dongguan City, Guangdong that a notice on strengthening the environmental protection access of the city’s key volatile organic compounds industries has been issued.



    Notice on Strengthening the Environmental Access of Key Volatile Organic Compound Industries in Our City Notice on Strengthening the Environmental Access of Key Volatile Organic Compound Industries in Our City

    Donghuan Office Letter (2017) No.


    Donghuan Banhan (2017) No.


    All environmental protection sub-bureaus, environmental supervision sub-bureaus, directly affiliated units, and departments (offices) of the Municipal Bureau:

    In order to effectively prevent and control air pollution, further improve the environmental air quality of the city, and protect the health of the people, in accordance with the Air Pollution Prevention and Control Law of the People’s Republic of China and national, provincial, and municipal air pollution prevention and control policy requirements, combined with the city’s actual conditions, According to the research, the notice on strengthening the environmental protection access requirements of key volatile organic compounds (hereinafter referred to as "VOCs") industries in our city is as follows:

    In order to effectively prevent and control air pollution, further improve the environmental air quality of the city, and protect the health of the people, in accordance with the Air Pollution Prevention and Control Law of the People’s Republic of China and national, provincial, and municipal air pollution prevention and control policy requirements, combined with the city’s actual conditions, According to the research, the notice on strengthening the environmental protection access requirements of key volatile organic compounds (hereinafter referred to as "VOCs") industries in our city is as follows:



    1.


    Focus on controlling the following 12 industries, including: oil refining and petrochemicals, chemical raw materials and chemical products manufacturing (solvent-based coatings, inks, pigments, adhesives and similar products manufacturing), chemical raw materials medicine manufacturing, synthetic fiber manufacturing (nylon, polyester, Spandex fiber manufacturing), surface coating (including metal and plastic surface coating), printing (including long screen printing), shoemaking, furniture manufacturing, wood-based panel manufacturing, electronic component manufacturing (copper-clad laminate and printed circuit board) Manufacturing), textile printing and dyeing, plastic manufacturing and plastic products (including primary form plastics, synthetic resin manufacturing, solvent-based adhesive tape, artificial leather, and synthetic leather manufacturing).



    2.


    The city will be divided into prohibited areas, strict control areas and general control areas for key VOCs control industries, and further tighten environmental protection access for key VOCs control industries.


    Prohibited areas: within the ring road and the central area of ​​the towns and streets (delimited by the towns and streets themselves).


    Strictly control areas: the areas outside the ring road of the four streets of Guancheng, Dongcheng, Nancheng and Wanjiang, as well as the town streets of Houjie, Dalingshan, Liaobu, Chang'an, and Humen.


    General control area: except for the above-mentioned areas, other areas are general control areas.




    Three, VOCs key control industry total control requirements

    3.
    VOCs key control industry total control requirements 3.
    VOCs key control industry total control requirements

    (1) Overall requirements.
    VOCs focus on the industry to control the newly added VOCs emissions of the project to implement a total reduction and substitution system, the town and street where the project is located provide a source of total VOCs emissions indicators to ensure that the total emissions of industrial VOCs in the region are gradually reduced.
    For projects that have not obtained the source of total VOCs emission indicators, the approval of their project environmental impact assessment documents will be suspended.

    (1) Overall requirements.
    VOCs focus on the industry to control the newly added VOCs emissions of the project to implement a total reduction and substitution system, the town and street where the project is located provide a source of total VOCs emissions indicators to ensure that the total emissions of industrial VOCs in the region are gradually reduced.
    For projects that have not obtained the source of total VOCs emission indicators, the approval of their project environmental impact assessment documents will be suspended.




    (2) Differentiated regional substitution requirements.
    The prohibited areas will no longer build furniture, shoemaking, printing (including long screen printing), surface coating (including metal and plastic surface coating), oil refining and petrochemical, chemical raw materials and chemical product manufacturing (solvent-based coatings, inks, The manufacturing of pigments, adhesives and similar products) and other newly-added key VOCs emission control industry projects (except for major projects above the municipal level), and other key VOCs control industry projects implement "two times the total amount replacement.
    " Strictly control the construction of furniture, shoemaking, printing (including long screen printing), surface coating (including metal and plastic surface coating), oil refining and petrochemical, chemical raw materials and chemical product manufacturing (solvent-based coatings, inks, pigments, adhesives) The manufacturing of new VOCs and other key control industry projects such as the production of VOCs must implement "2 times the total amount replacement", and other VOCs key control industry projects implement "1.
    5 times the total amount replacement".
    The key control industry projects for the construction of new VOCs emissions in general control areas must implement "reduction and substitution.
    "

    (2) Differentiated regional substitution requirements.
    The prohibited areas will no longer build furniture, shoemaking, printing (including long screen printing), surface coating (including metal and plastic surface coating), oil refining and petrochemical, chemical raw materials and chemical product manufacturing (solvent-based coatings, inks, The manufacturing of pigments, adhesives and similar products) and other newly-added key VOCs emission control industry projects (except for major projects above the municipal level), and other key VOCs control industry projects implement "two times the total amount replacement.
    " Strictly control the construction of furniture, shoemaking, printing (including long screen printing), surface coating (including metal and plastic surface coating), oil refining and petrochemical, chemical raw materials and chemical product manufacturing (solvent-based coatings, inks, pigments, adhesives) The manufacturing of new VOCs and other key control industry projects such as the production of VOCs must implement "2 times the total amount replacement", and other VOCs key control industry projects implement "1.
    5 times the total amount replacement".
    The key control industry projects for the construction of new VOCs emissions in general control areas must implement "reduction and substitution.
    "




    (3) The principle of total allocation.
    Projects in industrial clusters (industrial parks) have passed the planning of environmental impact assessment, and the total VOCs indicators have been incorporated into the regional planning environmental assessment total amount for unified deployment.
    In principle, the source of total VOCs emission indicators for prohibited areas and strictly controlled areas are obtained by towns (streets) in the area, and towns (streets) in general control areas can be obtained through the deployment of the town (street) and other towns (streets).
    If the source of the total VOCs emission indicators of the towns (streets) where the above major projects are located is insufficient, the municipal level shall make overall plans and deploy.

    (3) The principle of total allocation.
    Projects in industrial clusters (industrial parks) have passed the planning of environmental impact assessment, and the total VOCs indicators have been incorporated into the regional planning environmental assessment total amount for unified deployment.
    In principle, the source of total VOCs emission indicators for prohibited areas and strictly controlled areas are obtained by towns (streets) in the area, and towns (streets) in general control areas can be obtained through the deployment of the town (street) and other towns (streets).
    If the source of the total VOCs emission indicators of the towns (streets) where the above major projects are located is insufficient, the municipal level shall make overall plans and deploy.




    4.
    Requirements for the verification of the source of total VOCs indicators

    4.
    Requirements for the verification of the source of total VOCs indicators 4.
    Requirements for the verification of the source of total VOCs indicators

    (1) Identification of the source of the total amount.
    The total indicators of the newly added VOCs emissions project must come from the active source enterprises in the "Confirmation Letter of VOCs Industrial Source Emission List of Dongguan Town Streets".
    The reductions obtained by the active source enterprises through improvement measures such as upgrading, remediation, and elimination can be used for Replacement of total VOCs.

    (1) Identification of the source of the total amount.
    The total indicators of the newly added VOCs emissions project must come from the active source enterprises in the "Confirmation Letter of VOCs Industrial Source Emission List of Dongguan Town Streets".
    The reductions obtained by the active source enterprises through improvement measures such as upgrading, remediation, and elimination can be used for Replacement of total VOCs.




    (2) Accounting of source volume.
    The towns and streets can calculate and compare the VOCs emissions before and after the remediation of active source enterprises to obtain the reduction and replacement amount for total replacement.
    There are three accounting methods: 1.
    Directly use the VOCs emissions approved by the enterprise's environmental assessment report; 2.
    Through the enterprise The VOCs concentration in the monitoring report is used to calculate the VOCs emissions; 3.
    The VOCs emissions are calculated through the material balance of the raw and auxiliary materials in the enterprise environmental assessment report.

    (2) Accounting of source volume.
    The towns and streets can calculate and compare the VOCs emissions before and after the remediation of active source enterprises to obtain the reduction and replacement amount for total replacement.
    There are three accounting methods: 1.
    Directly use the VOCs emissions approved by the enterprise's environmental assessment report; 2.
    Through the enterprise The VOCs concentration in the monitoring report is used to calculate the VOCs emissions; 3.
    The VOCs emissions are calculated through the material balance of the raw and auxiliary materials in the enterprise environmental assessment report.




    (3) Project review and total settlement.
    Construction projects involving the replacement of the total amount of VOCs can be allocated directly from the VOCs balance settled by the towns and streets during the EIA approval stage.
    All towns and streets update the VOCs stock data in their jurisdictions in real time according to the remediation situation and update the VOCs margin data in real time according to the project approval status of their jurisdictions, and report to the city bureau on a quarterly basis.

    (3) Project review and total settlement.
    Construction projects involving the replacement of the total amount of VOCs can be allocated directly from the VOCs balance settled by the towns and streets during the EIA approval stage.
    All towns and streets update the VOCs stock data in their jurisdictions in real time according to the remediation situation and update the VOCs margin data in real time according to the project approval status of their jurisdictions, and report to the city bureau on a quarterly basis.




    Five, VOCs key control industry pollution prevention and control points

    5.
    Key points of pollution prevention and control in key VOCs control industries 5.
    Key points of pollution prevention and control in key VOCs control industries





    The production activities of VOCs key control industry projects that produce volatile organic waste gas should be carried out in confined spaces or equipment, and pollution prevention and control facilities should be installed and used in accordance with regulations; if they cannot be sealed, measures should be taken to reduce waste gas emissions.
    According to the industrial source classification of key VOCs control industries, requirements are made in terms of raw and auxiliary materials, production processes, governance measures, etc.
    , and the "Key VOCs Control Industries Pollution Prevention and Control Points" (see appendix) are formulated, and the pollution prevention requirements for new construction, reconstruction, and expansion projects are strictly enforced.
    Strictly implemented in environmental assessment and approval, environmental protection acceptance and supervision and supervision.

    The production activities of VOCs key control industry projects that produce volatile organic waste gas should be carried out in confined spaces or equipment, and pollution prevention and control facilities should be installed and used in accordance with regulations; if they cannot be sealed, measures should be taken to reduce waste gas emissions.
    According to the industrial source classification of key VOCs control industries, requirements are made in terms of raw and auxiliary materials, production processes, governance measures, etc.
    , and the "Key VOCs Control Industries Pollution Prevention and Control Points" (see appendix) are formulated, and the pollution prevention requirements for new construction, reconstruction, and expansion projects are strictly enforced.
    Strictly implemented in environmental assessment and approval, environmental protection acceptance and supervision and supervision.

    Dongguan Environmental Protection Bureau Office

    Dongguan Environmental Protection Bureau Office

    January 4, 2017

    January 4, 2017

    Disclosure: Actively disclose

    Disclosure: Actively disclose




    VOCs key control industry pollution prevention and control points

    Key points of pollution prevention and control of VOCs key control industries Key points of pollution prevention and control of VOCs key control industries

    1.
    Refining and petrochemical industry

    1.
    Refining and petrochemical industry 1.
    Refining and petrochemical industry

    It is applicable to industries in which the industry code and category name in "Classification of National Economic Industries" (GB/T4754-2011) are crude oil processing and petroleum product manufacturing (C2511), and organic chemical raw material manufacturing (C2614) using petroleum distillate/natural gas as raw materials.
    The comprehensive management of the petrochemical industry is implemented in accordance with the Ministry of Environmental Protection's "Notice on Issuing the Comprehensive Remediation Plan for Volatile Organic Compounds in the Petrochemical Industry" (Huanfa?2014?177).

    It is applicable to industries in which the industry code and category name in "Classification of National Economic Industries" (GB/T4754-2011) are crude oil processing and petroleum product manufacturing (C2511), and organic chemical raw material manufacturing (C2614) using petroleum distillate/natural gas as raw materials.
    The comprehensive management of the petrochemical industry is implemented in accordance with the Ministry of Environmental Protection's "Notice on Issuing the Comprehensive Remediation Plan for Volatile Organic Compounds in the Petrochemical Industry" (Huanfa?2014?177).




    Vigorously promote cleaner production.
    Prioritize the selection of low-volatility raw and auxiliary materials and advanced closed production technology, strengthen the airtightness and safety of easy leakage links such as production, transportation, material in and out, drying and sampling, and strengthen the collection and effective treatment of unorganized waste gas.

    Vigorously promote cleaner production.
    Prioritize the selection of low-volatility raw and auxiliary materials and advanced closed production technology, strengthen the airtightness and safety of easy leakage links such as production, transportation, material in and out, drying and sampling, and strengthen the collection and effective treatment of unorganized waste gas.




    Full implementation of Leak Detection and Repair (LDAR) technology.
    All key oil refining and petrochemical enterprises shall establish a "leak detection and repair" management system, set numbers and marks on the sealing points, and timely repair the sealing points with excessive leakage.
    Establish an enterprise LDAR information management platform, comprehensively analyze the leakage point information, formulate targeted improvement measures for the easy-to-leak links, and report the enterprise's LDAR implementation and unorganized emissions to the environmental protection department every quarter.

    Full implementation of Leak Detection and Repair (LDAR) technology.
    All key oil refining and petrochemical enterprises shall establish a "leak detection and repair" management system, set numbers and marks on the sealing points, and timely repair the sealing points with excessive leakage.
    Establish an enterprise LDAR information management platform, comprehensively analyze the leakage point information, formulate targeted improvement measures for the easy-to-leak links, and report the enterprise's LDAR implementation and unorganized emissions to the environmental protection department every quarter.




    Strengthen the control of exhaust gas emissions from organized processes.
    Process waste gas should be recycled and reused in the production system as a priority.
    If it is difficult to be recycled, catalytic combustion, thermal incineration, etc.
    , should be used to purify and discharge after reaching the standard.
    Take appropriate measures to recover the exhaust gas discharged into the torch system as much as possible; the torch should be equipped with a standardized ignition system in accordance with relevant requirements to ensure that the VOCs discharged through the torch are ignited and burned as fully as possible.

    Strengthen the control of exhaust gas emissions from organized processes.
    Process waste gas should be recycled and reused in the production system as a priority.
    If it is difficult to be recycled, catalytic combustion, thermal incineration, etc.
    , should be used to purify and discharge after reaching the standard.
    Take appropriate measures to recover the exhaust gas discharged into the torch system as much as possible; the torch should be equipped with a standardized ignition system in accordance with relevant requirements to ensure that the VOCs discharged through the torch are ignited and burned as fully as possible.




    Strictly control storage and handling losses.
    Volatile organic liquid storage facilities shall adopt pressure tanks, cryogenic tanks, high-efficiency sealed floating roof tanks or vault tanks equipped with headspace communication replacement oil and gas recovery devices under the premise of compliance with safety and other relevant regulations.
    Among them, benzene, toluene, and two For hazardous chemicals such as toluene, treatment facilities such as oil and gas recovery devices should be installed on the basis of internal floating roof tanks.
    The loading and unloading of volatile organic liquids should be fully enclosed and under liquid loading.
    Splash loading is strictly prohibited.
    High volatile organic liquids such as gasoline, naphtha, and kerosene, and hazardous chemicals such as benzene, toluene, and xylene should be prioritized for high-efficiency gas recovery.
    Transport-related products should use vehicles and ships with interfaces for oil and gas recovery.

    Strictly control storage and handling losses.
    Volatile organic liquid storage facilities shall adopt pressure tanks, cryogenic tanks, high-efficiency sealed floating roof tanks or vault tanks equipped with headspace communication replacement oil and gas recovery devices under the premise of compliance with safety and other relevant regulations.
    Among them, benzene, toluene, and two For hazardous chemicals such as toluene, treatment facilities such as oil and gas recovery devices should be installed on the basis of internal floating roof tanks.
    The loading and unloading of volatile organic liquids should be fully enclosed and under liquid loading.
    Splash loading is strictly prohibited.
    High volatile organic liquids such as gasoline, naphtha, and kerosene, and hazardous chemicals such as benzene, toluene, and xylene should be prioritized for high-efficiency gas recovery.
    Transport-related products should use vehicles and ships with interfaces for oil and gas recovery.




    Strengthen the waste gas treatment of waste water, liquid and waste residue system.
    During the collection, storage, and treatment of waste water, liquid and residue, effective containment and collection measures should be taken to ensure that the exhaust gas meets relevant standards after collection and treatment, and dilution and discharge are prohibited.

    Strengthen the waste gas treatment of waste water, liquid and waste residue system.
    During the collection, storage, and treatment of waste water, liquid and residue, effective containment and collection measures should be taken to ensure that the exhaust gas meets relevant standards after collection and treatment, and dilution and discharge are prohibited.




    Strengthen the pollution control of abnormal working conditions.
    Formulate operating procedures and pollution control measures for abnormal working conditions such as startup and shutdown, inspection and maintenance, abnormal production, etc.
    , and the materials containing volatile organic compounds discharged from the production equipment under abnormal working conditions, exhaust gas and cleaning gas before inspection and maintenance should be connected to recycling or Purification treatment device.
    Planned operations such as parking, inspection and maintenance of enterprises should be reported to the environmental protection department for the record, and environmental supervision and post-evaluation should be strengthened during implementation; pollution should be strictly controlled for unplanned operations, and accidental emissions should be eliminated.

    Strengthen the pollution control of abnormal working conditions.
    Formulate operating procedures and pollution control measures for abnormal working conditions such as startup and shutdown, inspection and maintenance, abnormal production, etc.
    , and the materials containing volatile organic compounds discharged from the production equipment under abnormal working conditions, exhaust gas and cleaning gas before inspection and maintenance should be connected to recycling or Purification treatment device.
    Planned operations such as parking, inspection and maintenance of enterprises should be reported to the environmental protection department for the record, and environmental supervision and post-evaluation should be strengthened during implementation; pollution should be strictly controlled for unplanned operations, and accidental emissions should be eliminated.




    2.
    Manufacturing of chemical raw materials and chemical products

    2.
    Chemical raw materials and chemical products manufacturing industry 2.
    Chemical raw materials and chemical products manufacturing industry

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011) for C26 chemical raw materials and chemical product manufacturing (excluding the manufacturing of organic chemical raw materials that directly use petroleum distillate/natural gas as raw materials), including organic chemistry Raw material manufacturing (C2614, excluding organic chemical raw material manufacturing using petroleum distillate/natural gas as raw materials) and paint, ink, pigment and similar product manufacturing (C264) companies.
    Focus on controlling the manufacture of organic chemical raw materials and the manufacture of solvent-based coatings, inks, pigments and similar products.

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011) for C26 chemical raw materials and chemical product manufacturing (excluding the manufacturing of organic chemical raw materials that directly use petroleum distillate/natural gas as raw materials), including organic chemistry Raw material manufacturing (C2614, excluding organic chemical raw material manufacturing using petroleum distillate/natural gas as raw materials) and paint, ink, pigment and similar product manufacturing (C264) companies.
    Focus on controlling the manufacture of organic chemical raw materials and the manufacture of solvent-based coatings, inks, pigments and similar products.




    Vigorously promote industrial upgrading.
    The coatings for interior decoration and solvent-based wood furniture coatings produced by newly-built coating companies must meet the requirements of national environmental labeling products.
    It is forbidden to produce interior decoration paints with hazardous substance content and volatile organic compound content exceeding 200 g/L and solvent-based wood furniture paints exceeding 700 g/L.

    Vigorously promote industrial upgrading.
    The coatings for interior decoration and solvent-based wood furniture coatings produced by newly-built coating companies must meet the requirements of national environmental labeling products.
    It is forbidden to produce interior decoration paints with hazardous substance content and volatile organic compound content exceeding 200 g/L and solvent-based wood furniture paints exceeding 700 g/L.




    Adopt closed integrated production technology.
    Waste gas collection and purification treatment should be carried out at the feeding port, inspection port and product packaging point of the production device, and the purification efficiency should be greater than 90%.
    The reactor should be supplied with pipes, the bottom should be fed or immersed in the pipe, and the top should be fed with a pipe attached to the wall; the breathing pipe of the reactor should be equipped with a condensing reflux device; the feed (out) should be equipped with a gas collecting device or airtight In areas where it is difficult to achieve airtightness, negative pressure exhaust should be used.
    The vacuum exhaust gas should be recovered by condensation.
    For the vacuum pump with high organic concentration, a multi-stage condensation recovery device must be installed before and after the vacuum pump.
    Distillation solvents should adopt multi-stage gradient condensation, preferentially using high-efficiency heat exchange equipment such as spiral-wound tube or plate condensers.
    For low-boiling solvents, refrigerating media should be used for deep condensation.
    Use airtight centrifugal, filter press, and drying equipment, prohibit the use of open organic solvent solid-liquid separation equipment, encourage the use of fully automatic airtight centrifuges, multifunctional integrated filter presses, underflow plate and frame filter presses and other advanced centrifuges , Filter press equipment, double cone vacuum dryer, flash dryer, spray dryer and other advanced drying equipment.

    Adopt closed integrated production technology.
    Waste gas collection and purification treatment should be carried out at the feeding port, inspection port and product packaging point of the production device, and the purification efficiency should be greater than 90%.
    The reactor should be supplied with pipes, the bottom should be fed or immersed in the pipe, and the top should be fed with a pipe attached to the wall; the breathing pipe of the reactor should be equipped with a condensing reflux device; the feed (out) should be equipped with a gas collecting device or airtight In areas where it is difficult to achieve airtightness, negative pressure exhaust should be used.
    The vacuum exhaust gas should be recovered by condensation.
    For the vacuum pump with high organic concentration, a multi-stage condensation recovery device must be installed before and after the vacuum pump.
    Distillation solvents should adopt multi-stage gradient condensation, preferentially using high-efficiency heat exchange equipment such as spiral-wound tube or plate condensers.
    For low-boiling solvents, refrigerating media should be used for deep condensation.
    Use airtight centrifugal, filter press, and drying equipment, prohibit the use of open organic solvent solid-liquid separation equipment, encourage the use of fully automatic airtight centrifuges, multifunctional integrated filter presses, underflow plate and frame filter presses and other advanced centrifuges , Filter press equipment, double cone vacuum dryer, flash dryer, spray dryer and other advanced drying equipment.




    Standardize the storage of liquid organic materials.
    Liquid organic chemical raw materials, intermediate products, and finished products should be stored in a closed manner.
    All storage tanks for organic materials with lower boiling points should be equipped with heat preservation and equipped with nitrogen sealing devices.
    The loading and unloading process should adopt balance tube technology; larger storage tanks should adopt efficient sealed inner tanks.
    (External) Floating roof tanks; large storage tanks should adopt high-efficiency sealed floating roof tanks and nitrogen sealing devices.

    Standardize the storage of liquid organic materials.
    Liquid organic chemical raw materials, intermediate products, and finished products should be stored in a closed manner.
    All storage tanks for organic materials with lower boiling points should be equipped with heat preservation and equipped with nitrogen sealing devices.
    The loading and unloading process should adopt balance tube technology; larger storage tanks should adopt efficient sealed inner tanks.
    (External) Floating roof tanks; large storage tanks should adopt high-efficiency sealed floating roof tanks and nitrogen sealing devices.




    Strengthen the comprehensive treatment of organic waste gas.
    The whole production process such as reaction, distillation, vacuuming, solid-liquid separation, dispersion, grinding, drying, feeding, unloading, sampling, material transfer, reactor cleaning, etc.
    should be centralized collection and purification of organic waste gas, and the purification efficiency should be greater than 90% .
    Single-component high-concentration waste gas is prioritized by various recovery processes for pretreatment; organic solvent waste gas is preferentially recovered by condensation, adsorption-condensation, and ionic liquid absorption devices.
    For those that are difficult to recycle, combustion methods should be used for efficient treatment; contain volatile Organic materials or waste water collection systems and processing units that are prone to malodorous effects should be sealed, and malodorous waste gas should be purified and treated with pyrolysis, adsorption, biological treatment and other technologies and discharged after reaching the standard.

    Strengthen the comprehensive treatment of organic waste gas.
    The whole production process such as reaction, distillation, vacuuming, solid-liquid separation, dispersion, grinding, drying, feeding, unloading, sampling, material transfer, reactor cleaning, etc.
    should be centralized collection and purification of organic waste gas, and the purification efficiency should be greater than 90% .
    Single-component high-concentration waste gas is prioritized by various recovery processes for pretreatment; organic solvent waste gas is preferentially recovered by condensation, adsorption-condensation, and ionic liquid absorption devices.
    For those that are difficult to recycle, combustion methods should be used for efficient treatment; contain volatile Organic materials or waste water collection systems and processing units that are prone to malodorous effects should be sealed, and malodorous waste gas should be purified and treated with pyrolysis, adsorption, biological treatment and other technologies and discharged after reaching the standard.




    3.
    Chemical raw material medicine manufacturing industry

    3.
    Chemical raw material medicine manufacturing industry 3.
    Chemical raw material medicine manufacturing industry

    It is applicable to the industry code and category name of C271 chemical raw material medicine manufacturing industry in "Classification of National Economic Industries" (GB/T4754-2011).

    It is applicable to the industry code and category name of C271 chemical raw material medicine manufacturing industry in "Classification of National Economic Industries" (GB/T4754-2011).




    Vigorously promote the implementation of cleaner production.
    Gradually use non-halogenated and non-aromatic solvents (such as ethyl acetate, alcohol, acetone, etc.
    ) and other non-toxic, harmless or low-toxic, low-harm raw and auxiliary materials.
    Encourage the use of extraction and separation such as dynamic extraction, microwave extraction, ultrasonic extraction, two-phase extraction, supercritical extraction, liquid membrane method, membrane separation, macroporous resin adsorption, multi-effect concentration, vacuum belt drying, microwave drying, spray drying, etc.
    , Purification, concentration and drying technology.

    Vigorously promote the implementation of cleaner production.
    Gradually use non-halogenated and non-aromatic solvents (such as ethyl acetate, alcohol, acetone, etc.
    ) and other non-toxic, harmless or low-toxic, low-harm raw and auxiliary materials.
    Encourage the use of extraction and separation such as dynamic extraction, microwave extraction, ultrasonic extraction, two-phase extraction, supercritical extraction, liquid membrane method, membrane separation, macroporous resin adsorption, multi-effect concentration, vacuum belt drying, microwave drying, spray drying, etc.
    , Purification, concentration and drying technology.




    Improve the airtight level of production operations.
    The production process should adopt closed equipment and raw material conveying pipelines to close all unnecessary openings to improve the airtightness of process equipment.
    It is advisable to use discharging, pumping or pressing technology for feeding materials, and not to use vacuum pumping to reduce the volatilization of organic solvents.
    Eliminate water flushing pumps, preferentially use water ring pumps, liquid ring pumps, oil-free vertical mechanical vacuum pumps and other vacuum equipment with good airtightness.
    Vacuum tail gas should be condensed to recover materials.
    It is encouraged to install buffer tanks and condensing devices before and after the pump.
    Class A liquids with a boiling point lower than 45°C should be stored in pressure storage tanks.
    If a volatile medium with a boiling point higher than 45°C is stored in a fixed-top storage tank, storage tank temperature control and tank top waste gas recovery or pretreatment facilities should be set up.
    The gas phase space of intermediate product and finished product storage tanks should be equipped with a nitrogen protection system, and respiratory exhaust gas should be collected and treated.

    Improve the airtight level of production operations.
    The production process should adopt closed equipment and raw material conveying pipelines to close all unnecessary openings to improve the airtightness of process equipment.
    It is advisable to use discharging, pumping or pressing technology for feeding materials, and not to use vacuum pumping to reduce the volatilization of organic solvents.
    Eliminate water flushing pumps, preferentially use water ring pumps, liquid ring pumps, oil-free vertical mechanical vacuum pumps and other vacuum equipment with good airtightness.
    Vacuum tail gas should be condensed to recover materials.
    It is encouraged to install buffer tanks and condensing devices before and after the pump.
    Class A liquids with a boiling point lower than 45°C should be stored in pressure storage tanks.
    If a volatile medium with a boiling point higher than 45°C is stored in a fixed-top storage tank, storage tank temperature control and tank top waste gas recovery or pretreatment facilities should be set up.
    The gas phase space of intermediate product and finished product storage tanks should be equipped with a nitrogen protection system, and respiratory exhaust gas should be collected and treated.




    Strengthen the comprehensive treatment of organic waste gas.
    Feeding, reaction, refining, vacuuming, solid-liquid separation, drying and other production processes and reactor cleaning process waste gas should be connected to the organic waste gas control system for solvent recovery and purification treatment, and the treatment efficiency should be greater than 90%.
    Organic solvent waste gas should be recovered by condensation, adsorption-condensation, absorption and other recovery devices, and combustion, catalytic oxidation, etc.
    , which are difficult to recycle, should be used for treatment.
    Fermentation tail gas should be treated with deodorization measures, and deodorization facilities should be provided in workshops and devices that produce malodorous gas.
    Sewage treatment units that are prone to foul odors should be sealed, and the collected waste gas should be treated by chemical absorption, biological filtration, adsorption and other methods before reaching the discharge standards.

    Strengthen the comprehensive treatment of organic waste gas.
    Feeding, reaction, refining, vacuuming, solid-liquid separation, drying and other production processes and reactor cleaning process waste gas should be connected to the organic waste gas control system for solvent recovery and purification treatment, and the treatment efficiency should be greater than 90%.
    Organic solvent waste gas should be recovered by condensation, adsorption-condensation, absorption and other recovery devices, and combustion, catalytic oxidation, etc.
    , which are difficult to recycle, should be used for treatment.
    Fermentation tail gas should be treated with deodorization measures, and deodorization facilities should be provided in workshops and devices that produce malodorous gas.
    Sewage treatment units that are prone to foul odors should be sealed, and the collected waste gas should be treated by chemical absorption, biological filtration, adsorption and other methods before reaching the discharge standards.




    4.
    Synthetic fiber manufacturing industry

    4.
    Synthetic fiber manufacturing industry 4.
    Synthetic fiber manufacturing industry

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C282 synthetic fiber manufacturing industry, focusing on the control of nylon fiber manufacturing (C2821), polyester fiber manufacturing (C2822) and spandex fiber manufacturing (C2826) enterprise.

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C282 synthetic fiber manufacturing industry, focusing on the control of nylon fiber manufacturing (C2821), polyester fiber manufacturing (C2822) and spandex fiber manufacturing (C2826) enterprise.




    Vigorously promote cleaner production.
    Intensify the promotion of cleaner production technology in the synthetic fiber manufacturing industry.
    Synthetic fiber manufacturing enterprises should meet the second level of the cleaner production standards of "Clean Production Standardization Fiber Industry (Polyester)" and "Clean Production Standardization Fiber Industry (Spandex)".

    Vigorously promote cleaner production.
    Intensify the promotion of cleaner production technology in the synthetic fiber manufacturing industry.
    Synthetic fiber manufacturing enterprises should meet the second level of the cleaner production standards of "Clean Production Standardization Fiber Industry (Polyester)" and "Clean Production Standardization Fiber Industry (Spandex)".




    Adopt closed integrated production technology.
    Strictly control the respiration loss in the storage and transportation of synthetic fiber manufacturing enterprises such as nylon, polyester, and spandex.
    Volatile materials should be sealed and stored.
    Use airtight raw material conveying pipelines and airtight equipment.
    Feeding should be done by discharging, pumping or pressing technology, and the production process should be closed.
    The production process units of esterification, polymerization, melting, heat medium, cleaning, refining, spinning, and winding must all collect waste gas and purify them.

    Adopt closed integrated production technology.
    Strictly control the respiration loss in the storage and transportation of synthetic fiber manufacturing enterprises such as nylon, polyester, and spandex.
    Volatile materials should be sealed and stored.
    Use airtight raw material conveying pipelines and airtight equipment.
    Feeding should be done by discharging, pumping or pressing technology, and the production process should be closed.
    The production process units of esterification, polymerization, melting, heat medium, cleaning, refining, spinning, and winding must all collect waste gas and purify them.




    Strengthen the emission control of esterification waste gas, polymerization waste gas, and spinning finish.
    The esterification reaction process unit of polyester manufacturing must be equipped with waste gas recovery devices to recover the discharged acetaldehyde vapor.
    The exhaust gas shall be discharged after reaching the standard after high-efficiency purification measures such as direct incineration, thermal storage incineration, and catalytic incineration; The silk process unit must be equipped with a refining recovery device to recycle the discharged dimethylformamide (DMF) or dimethylacetamide (DMAc) waste gas.
    The rectification tail gas should be purified by adsorption and other technologies and discharged after reaching the standard; full stretch The oil exhaust gas from the production process units of FDY/DTY spinning, oiling, heating, traction and stretching, etc.
    should be collected uniformly, and it is advisable to adopt a combination of mechanical purification and absorption technology or high-voltage electrostatic technology after purification.
    Discharge.

    Strengthen the emission control of esterification waste gas, polymerization waste gas, and spinning finish.
    The esterification reaction process unit of polyester manufacturing must be equipped with waste gas recovery devices to recover the discharged acetaldehyde vapor.
    The exhaust gas shall be discharged after reaching the standard after high-efficiency purification measures such as direct incineration, thermal storage incineration, and catalytic incineration; The silk process unit must be equipped with a refining recovery device to recycle the discharged dimethylformamide (DMF) or dimethylacetamide (DMAc) waste gas.
    The rectification tail gas should be purified by adsorption and other technologies and discharged after reaching the standard; full stretch The oil exhaust gas from the production process units of FDY/DTY spinning, oiling, heating, traction and stretching, etc.
    should be collected uniformly, and it is advisable to adopt a combination of mechanical purification and absorption technology or high-voltage electrostatic technology after purification.
    Discharge.




    5.
    Surface coating industry

    5.
    Surface coating industry 5.
    Surface coating industry

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011): C33 metal products, C34 general equipment manufacturing, C35 special equipment manufacturing, C36 automobile manufacturing, C37 railway, shipping, aerospace and other transportation Equipment manufacturing, C38 electrical machinery and equipment manufacturing, C40 instrumentation manufacturing, C43 metal products, machinery and equipment repair, and plastic-containing surface coating technology industries.

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011): C33 metal products, C34 general equipment manufacturing, C35 special equipment manufacturing, C36 automobile manufacturing, C37 railway, shipping, aerospace and other transportation Equipment manufacturing, C38 electrical machinery and equipment manufacturing, C40 instrumentation manufacturing, C43 metal products, machinery and equipment repair, and plastic-containing surface coating technology industries.




    Increase the proportion of coatings with low volatile organic content.
    Encourage companies to use water-based, high-solid, powder, and UV-curable coatings with low VOCs content that meet environmental protection requirements.
    The VOCs content of the coatings used in the spraying, maintenance spraying and paint touch-up processes of automobile manufacturing should meet the requirements of "Limits of Hazardous Substances in Automotive Coatings" (GB24409), and the coatings used in the production process of container manufacturing should meet the requirements of "Container Coatings" (JH/TE01) Regulations.
    In principle, the proportion of low-VOCs-containing paints used in industrial coating projects should reach more than 50%; in motor vehicle manufacturing and maintenance coating projects, the proportion of low-VOCs-containing coatings in the total coatings used should not be less than 80%.

    Increase the proportion of coatings with low volatile organic content.
    Encourage companies to use water-based, high-solid, powder, and UV-curable coatings with low VOCs content that meet environmental protection requirements.
    The VOCs content of the coatings used in the spraying, maintenance spraying and paint touch-up processes of automobile manufacturing should meet the requirements of "Limits of Hazardous Substances in Automotive Coatings" (GB24409), and the coatings used in the production process of container manufacturing should meet the requirements of "Container Coatings" (JH/TE01) Regulations.
    In principle, the proportion of low-VOCs-containing paints used in industrial coating projects should reach more than 50%; in motor vehicle manufacturing and maintenance coating projects, the proportion of low-VOCs-containing coatings in the total coatings used should not be less than 80%.




    Actively promote the concept of "green coating".
    Promote industrial enterprises involved in industrial coating processes to gradually adopt new and environmentally friendly coating materials, use advanced and reliable coating technology and equipment, and reduce the emission of volatile organic compounds per unit of product.
    The VOCs emissions per unit coating area of ​​the automobile manufacturing and maintenance coating production line should meet the requirements of the Guangdong Province "Surface Coating (Automobile Manufacturing) Volatile Organic Compound Emission Standards" (DB44/819-2010).
    The VOCs emissions per unit painted area of ​​the vehicle should not be higher than 20 g/m2 and 150 g/m2, and the VOCs emissions per unit painted area of ​​the truck driver’s cabin and carriage should not be higher than 55 g/m2 and 70 g/m2.
    G/m².

    Actively promote the concept of "green coating".
    Promote industrial enterprises involved in industrial coating processes to gradually adopt new and environmentally friendly coating materials, use advanced and reliable coating technology and equipment, and reduce the emission of volatile organic compounds per unit of product.
    The VOCs emissions per unit coating area of ​​the automobile manufacturing and maintenance coating production line should meet the requirements of the Guangdong Province "Surface Coating (Automobile Manufacturing) Volatile Organic Compound Emission Standards" (DB44/819-2010).
    The VOCs emissions per unit painted area of ​​the vehicle should not be higher than 20 g/m2 and 150 g/m2, and the VOCs emissions per unit painted area of ​​the truck driver’s cabin and carriage should not be higher than 55 g/m2 and 70 g/m2.
    G/m².




    Strengthen the centralized collection and treatment of industrial coating process waste gas.
    Coatings, thinners, cleaning agents and other VOCs-containing raw and auxiliary materials should be stored or set up in sealed containers or closed work rooms to reduce the unorganized emissions of VOCs.
    All kinds of surface coating and drying processes that produce VOCs waste gas should be set up in a closed work room as much as possible, and centralized exhaust and VOCs pollution control equipment should be introduced for treatment; it is impossible to set up a production line in a closed work room, and the VOCs emission section should be exhausted.
    It is possible to set up an exhaust system composed of a gas hood and exhaust ducts.
    The collection rate of VOCs exhaust gas from the automotive coating process line, leveling room and drying room using solvent-based coatings should not be less than 95%.
    Others using solvent-based coatings The VOCs waste gas collection rate of the coating process line should reach more than 90%.
    The spraying exhaust gas from automobile manufacturing and maintenance must be treated with paint mist, and the removal efficiency should reach 95% or more; the particle discharge should be less than 10 mg/m3; the coating line with a small amount of paint should use filter cotton, non-woven fabric, and limestone It is a dry-type paint mist trapping system for filter media.
    For coating lines with a large amount of paint, dry electrostatic paint mist trapping devices and wet paint mist trapping devices should be used.
    VOCs pollution control devices should be operated synchronously with process facilities.
    Adsorption concentration-(catalytic) combustion method, regenerative direct incineration method (RTO), regenerative catalytic incineration method (RCO) and other purification treatments should be used to meet the emission standards and use solvents.
    The VOCs removal rate of the type coating process should reach more than 90%.
    The surface spray industry that uses oil-based solvents preferentially uses destruction technology or other combined technologies to purify VOCs.

    Strengthen the centralized collection and treatment of industrial coating process waste gas.
    Coatings, thinners, cleaning agents and other VOCs-containing raw and auxiliary materials should be stored or set up in sealed containers or closed work rooms to reduce the unorganized emissions of VOCs.
    All kinds of surface coating and drying processes that produce VOCs waste gas should be set up in a closed work room as much as possible, and centralized exhaust and VOCs pollution control equipment should be introduced for treatment; it is impossible to set up a production line in a closed work room, and the VOCs emission section should be exhausted.
    It is possible to set up an exhaust system composed of a gas hood and exhaust ducts.
    The collection rate of VOCs exhaust gas from the automotive coating process line, leveling room and drying room using solvent-based coatings should not be less than 95%.
    Others using solvent-based coatings The VOCs waste gas collection rate of the coating process line should reach more than 90%.
    The spraying exhaust gas from automobile manufacturing and maintenance must be treated with paint mist, and the removal efficiency should reach 95% or more; the particle discharge should be less than 10 mg/m3; the coating line with a small amount of paint should use filter cotton, non-woven fabric, and limestone It is a dry-type paint mist trapping system for filter media.
    For coating lines with a large amount of paint, dry electrostatic paint mist trapping devices and wet paint mist trapping devices should be used.
    VOCs pollution control devices should be operated synchronously with process facilities.
    Adsorption concentration-(catalytic) combustion method, regenerative direct incineration method (RTO), regenerative catalytic incineration method (RCO) and other purification treatments should be used to meet the emission standards and use solvents.
    The VOCs removal rate of the type coating process should reach more than 90%.
    The surface spray industry that uses oil-based solvents preferentially uses destruction technology or other combined technologies to purify VOCs.




    6.
    Printing industry

    6.
    Printing industry 6.
    Printing industry

    Applicable to the "National Economic Industry Classification" (GB/T4754-2011) the industry code and category name is C231 printing industry, including book, newspaper printing (2311), book printing (C2312), packaging and decoration and other printing (C2319) ) Enterprises and enterprises with long table screen printing technology.

    Applicable to the "National Economic Industry Classification" (GB/T4754-2011) the industry code and category name is C231 printing industry, including book, newspaper printing (2311), book printing (C2312), packaging and decoration and other printing (C2319) ) Enterprises and enterprises with long table screen printing technology.




    Promote the use of environmentally friendly inks and adhesives.
    Encourage the use of environmentally friendly inks and adhesives certified by environmental labeling products, and prohibit the use of inks and adhesives that do not meet environmental protection requirements.
    The printing process promotes the use of low-VOCs and low-toxic raw and auxiliary materials such as water-based inks, ultraviolet curable inks (UV inks), radiation curable inks (EB inks), alcohol-soluble inks, plant-based inks (such as soybean inks), composite and packaging processes Gradually use water-based adhesives instead of solvent-based adhesives, promote solvent-free composite technology, and promote the use of pre-coated film technology in the book printing industry.
    In printing projects, the proportion of inks with low VOCs content should not be less than 90%, and the proportion of water-based adhesives should not be less than 95%.

    Promote the use of environmentally friendly inks and adhesives.
    Encourage the use of environmentally friendly inks and adhesives certified by environmental labeling products, and prohibit the use of inks and adhesives that do not meet environmental protection requirements.
    The printing process promotes the use of low-VOCs and low-toxic raw and auxiliary materials such as water-based inks, ultraviolet curable inks (UV inks), radiation curable inks (EB inks), alcohol-soluble inks, plant-based inks (such as soybean inks), composite and packaging processes Gradually use water-based adhesives instead of solvent-based adhesives, promote solvent-free composite technology, and promote the use of pre-coated film technology in the book printing industry.
    In printing projects, the proportion of inks with low VOCs content should not be less than 90%, and the proportion of water-based adhesives should not be less than 95%.




    Strictly control the escape of organic materials from printing companies.
    Volatile raw and auxiliary materials such as inks, adhesives, and organic solvents should be sealed and stored, and organic materials with lower boiling points should be equipped with nitrogen sealing devices.
    The process line that produces VOCs waste gas should be set up in a closed work room as much as possible, and the air should be exhausted and introduced into VOCs control equipment for processing.
    It is impossible to set up a production line in a closed workshop, and the VOCs emission section should be equipped with an exhaust system composed of a gas hood and exhaust ducts.
    Single-sheet printing using solvent-based inks should avoid unorganized emissions, and use the workshop ventilation system to collect exhaust gas; rotary printing should set up exhaust gas collection devices at all VOCs emission points; the compounding process using solvent-based adhesives should be airtight in the drying section.
    Install waste gas collection facilities online.

    Strictly control the escape of organic materials from printing companies.
    Volatile raw and auxiliary materials such as inks, adhesives, and organic solvents should be sealed and stored, and organic materials with lower boiling points should be equipped with nitrogen sealing devices.
    The process line that produces VOCs waste gas should be set up in a closed work room as much as possible, and the air should be exhausted and introduced into VOCs control equipment for processing.
    It is impossible to set up a production line in a closed workshop, and the VOCs emission section should be equipped with an exhaust system composed of a gas hood and exhaust ducts.
    Single-sheet printing using solvent-based inks should avoid unorganized emissions, and use the workshop ventilation system to collect exhaust gas; rotary printing should set up exhaust gas collection devices at all VOCs emission points; the compounding process using solvent-based adhesives should be airtight in the drying section.
    Install waste gas collection facilities online.




    Strengthen the management of VOCs emission standards in the printing industry.
    Select appropriate technology according to the parameters such as the composition, concentration, and air volume of the exhaust gas in the printing industry.
    After purifying the organic waste gas in the workshop, the exhaust gas will reach the standard and the purification efficiency should reach 90% or more.
    For high-concentration organic waste gas with a single solvent type, such as toluene and ethyl acetate solvent waste gas emitted by publication gravure printing and flexible packaging composite processes, it is advisable to adopt the adsorption method for recycling; for high-concentration organic waste gas that is difficult to recycle, it is appropriate Adopt thermal combustion method; for low-concentration and high-air volume printing waste gas, it is suitable to adopt adsorption concentration-regenerative combustion or adsorption concentration-catalytic combustion method, and depending on the composition, scale and environmental sensitivity, choose photocatalytic oxidation or biological Law and other processes.
    The drying workshop must install an adsorption device to recover organic solvents.
    The cleaning solvent should be recycled.

    Strengthen the management of VOCs emission standards in the printing industry.
    Select appropriate technology according to the parameters such as the composition, concentration, and air volume of the exhaust gas in the printing industry.
    After purifying the organic waste gas in the workshop, the exhaust gas will reach the standard and the purification efficiency should reach 90% or more.
    For high-concentration organic waste gas with a single solvent type, such as toluene and ethyl acetate solvent waste gas emitted by publication gravure printing and flexible packaging composite processes, it is advisable to adopt the adsorption method for recycling; for high-concentration organic waste gas that is difficult to recycle, it is appropriate Adopt thermal combustion method; for low-concentration and high-air volume printing waste gas, it is suitable to adopt adsorption concentration-regenerative combustion or adsorption concentration-catalytic combustion method, and depending on the composition, scale and environmental sensitivity, choose photocatalytic oxidation or biological Law and other processes.
    The drying workshop must install an adsorption device to recover organic solvents.
    The cleaning solvent should be recycled.




    7.
    Shoemaking industry

    7.
    Shoemaking industry 7.
    Shoemaking industry

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011) as C195 shoemaking industry, including the use of solvent-based adhesives, treatment agents, cleaning agents, hardeners, port water, oily inks, oily Painted leather shoe manufacturing (C1952), plastic shoe manufacturing (C1953), and other shoe manufacturing (C1959) companies.

    Applicable to the industry code and category name in the "Classification of National Economic Industries" (GB/T4754-2011) as C195 shoemaking industry, including the use of solvent-based adhesives, treatment agents, cleaning agents, hardeners, port water, oily inks, oily Painted leather shoe manufacturing (C1952), plastic shoe manufacturing (C1953), and other shoe manufacturing (C1959) companies.




    Actively promote the use of low-toxic, low-VOCs raw and auxiliary materials.
    Adhesives used in the shoe industry should meet the requirements of the national mandatory standard "Shoes and Bag Adhesives"; use water-based adhesives, water-based hardeners, water-based treatment agents, hot-melt adhesives, hot-melt adhesives, water-based yellow glue, etc.
    Melting type low VOCs raw and auxiliary materials; using advanced production technology such as hot melt glue machine, automatic gluing front machine, automatic gluing middle and back machine, reducing the number of glue operations and the use of solvent-based raw and auxiliary materials.

    Actively promote the use of low-toxic, low-VOCs raw and auxiliary materials.
    Adhesives used in the shoe industry should meet the requirements of the national mandatory standard "Shoes and Bag Adhesives"; use water-based adhesives, water-based hardeners, water-based treatment agents, hot-melt adhesives, hot-melt adhesives, water-based yellow glue, etc.
    Melting type low VOCs raw and auxiliary materials; using advanced production technology such as hot melt glue machine, automatic gluing front machine, automatic gluing middle and back machine, reducing the number of glue operations and the use of solvent-based raw and auxiliary materials.




    Adopt airtight technology to improve the waste gas collection rate.
    Volatile adhesives should be prepared in sealed tanks, pressure pumps, pipelines, and volatile organic solvents such as treatment agents and cleaning agents should be stored in airtight containers and used as needed to reduce material loss due to volatilization.
    Face patching, forming, bottom grouping, painting, foaming, injection molding, printing, cleaning, oil-based adhesives, treatment agents, cleaning agents, hardeners, port water, oil-based inks, and oil-based paints are used in closed production processes.
    , Semi-closed technology or zone-sealed production process line for waste gas collection, the waste gas collection rate of painting and printing processes reaches more than 90%, and the waste gas collection rate of other production processes reaches 80%.

    Adopt airtight technology to improve the waste gas collection rate.
    Volatile adhesives should be prepared in sealed tanks, pressure pumps, pipelines, and volatile organic solvents such as treatment agents and cleaning agents should be stored in airtight containers and used as needed to reduce material loss due to volatilization.
    Face patching, forming, bottom grouping, painting, foaming, injection molding, printing, cleaning, oil-based adhesives, treatment agents, cleaning agents, hardeners, port water, oil-based inks, and oil-based paints are used in closed production processes.
    , Semi-closed technology or zone-sealed production process line for waste gas collection, the waste gas collection rate of painting and printing processes reaches more than 90%, and the waste gas collection rate of other production processes reaches 80%.




    Deepen the compliance management of VOCs emissions in the shoe industry.
    After the process waste gas produced by using oily raw and auxiliary materials is collected by the exhaust system, it should adopt adsorption concentration + catalytic combustion, thermal incineration and other destruction technologies or other combined technologies (such as ultraviolet photocatalytic oxidation + activated carbon adsorption, low-temperature plasma + activated carbon adsorption, etc.
    ) , The processing efficiency shall not be less than 80%.

    Deepen the compliance management of VOCs emissions in the shoe industry.
    After the process waste gas produced by using oily raw and auxiliary materials is collected by the exhaust system, it should adopt adsorption concentration + catalytic combustion, thermal incineration and other destruction technologies or other combined technologies (such as ultraviolet photocatalytic oxidation + activated carbon adsorption, low-temperature plasma + activated carbon adsorption, etc.
    ) , The processing efficiency shall not be less than 80%.




    8.
    Furniture manufacturing industry

    8.
    Furniture manufacturing industry 8.
    Furniture manufacturing industry

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C21 furniture manufacturing industry, including wood furniture manufacturing (C2110), metal furniture manufacturing (C2130) and other furniture manufacturing ( C2190) Enterprise.

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C21 furniture manufacturing industry, including wood furniture manufacturing (C2110), metal furniture manufacturing (C2130) and other furniture manufacturing ( C2190) Enterprise.




    Promote the use of coatings with low volatile organic compounds.
    Strictly control the storage and transportation of raw and auxiliary materials containing organic solvents; according to different coating processes, vigorously promote the use of low-VOCs content coatings such as water-based, powder, and UV-curable coatings, restrict the use of solvent-based coatings, and use low-VOCs in furniture manufacturing projects The proportion of content paint is not less than 90%.
    It is forbidden to use solvent-based wood furniture coatings exceeding 700 g/L.

    Promote the use of coatings with low volatile organic compounds.
    Strictly control the storage and transportation of raw and auxiliary materials containing organic solvents; according to different coating processes, vigorously promote the use of low-VOCs content coatings such as water-based, powder, and UV-curable coatings, restrict the use of solvent-based coatings, and use low-VOCs in furniture manufacturing projects The proportion of content paint is not less than 90%.
    It is forbidden to use solvent-based wood furniture coatings exceeding 700 g/L.




    Improve the level of clean production in the spraying process.
    Standardize the use of solvent-based coatings, thinners, curing agents, and adhesives, limit the area and store them in a sealed manner.
    Coatings should be deployed in sealed tanks and piped as needed.
    The workshop where oily coatings and oily adhesives such as primers, topcoats, drying, spraying, etc.
    are used must be sealed, and the exhaust gas collection rate should reach more than 95%.
    Open air spraying operations without VOCs purification and recovery measures are prohibited.
    Promote the use of high-efficiency coating processes such as electrostatic spraying, curtain coating, roller coating, and dip coating.

    Improve the level of clean production in the spraying process.
    Standardize the use of solvent-based coatings, thinners, curing agents, and adhesives, limit the area and store them in a sealed manner.
    Coatings should be deployed in sealed tanks and piped as needed.
    The workshop where oily coatings and oily adhesives such as primers, topcoats, drying, spraying, etc.
    are used must be sealed, and the exhaust gas collection rate should reach more than 95%.
    Open air spraying operations without VOCs purification and recovery measures are prohibited.
    Promote the use of high-efficiency coating processes such as electrostatic spraying, curtain coating, roller coating, and dip coating.




    Deepen the compliance management of VOCs emissions in the furniture manufacturing industry.
    The exhaust gas collected in a centralized manner shall be discharged after treatment with purification measures.
    The spraying exhaust gas must be treated with paint mist, and the amount of particulate matter discharged must not affect the treatment efficiency of the treatment facilities.
    Dry filtration should be used for high efficiency paint mist removal, or a wet water curtain and multi-stage filtration and dehumidification combined device can be used.
    After the exhaust gas is treated with paint mist removal, priority will be given to adsorption concentration + catalytic combustion, thermal incineration and other destruction technologies or other combined technologies (such as ultraviolet photocatalytic oxidation + activated carbon adsorption, low-temperature plasma + activated carbon adsorption), and the emission reaches the standard after purification.
    The total purification rate of organic waste gas should reach over 80%.

    Deepen the compliance management of VOCs emissions in the furniture manufacturing industry.
    The exhaust gas collected in a centralized manner shall be discharged after treatment with purification measures.
    The spraying exhaust gas must be treated with paint mist, and the amount of particulate matter discharged must not affect the treatment efficiency of the treatment facilities.
    Dry filtration should be used for high efficiency paint mist removal, or a wet water curtain and multi-stage filtration and dehumidification combined device can be used.
    After the exhaust gas is treated with paint mist removal, priority will be given to adsorption concentration + catalytic combustion, thermal incineration and other destruction technologies or other combined technologies (such as ultraviolet photocatalytic oxidation + activated carbon adsorption, low-temperature plasma + activated carbon adsorption), and the emission reaches the standard after purification.
    The total purification rate of organic waste gas should reach over 80%.




    Nine, wood-based panel manufacturing industry

    Nine, wood-based panel manufacturing industry Nine, wood-based panel manufacturing industry

    It is applicable to the industry code and category name of C202 wood-based panel manufacturing industry in "Classification of National Economic Industries" (GB/T4754-2011).

    It is applicable to the industry code and category name of C202 wood-based panel manufacturing industry in "Classification of National Economic Industries" (GB/T4754-2011).




    Vigorously promote the implementation of cleaner production by wood-based panel manufacturing enterprises.
    Actively promote the use of low-toxic and low-volatile solvents by wood-based panel companies, and encourage the use of environmentally friendly adhesives and water-based adhesives that have passed China's environmental labeling product certification.
    The amount of formaldehyde emission of man-made panels and products of indoor decoration and refurbishment materials produced shall meet the requirements of "Limits of Formaldehyde Release in Man-made Panels and Products of Interior Decoration and Renovation Materials".

    Vigorously promote the implementation of cleaner production by wood-based panel manufacturing enterprises.
    Actively promote the use of low-toxic and low-volatile solvents by wood-based panel companies, and encourage the use of environmentally friendly adhesives and water-based adhesives that have passed China's environmental labeling product certification.
    The amount of formaldehyde emission of man-made panels and products of indoor decoration and refurbishment materials produced shall meet the requirements of "Limits of Formaldehyde Release in Man-made Panels and Products of Interior Decoration and Renovation Materials".




    Strengthen the collection and treatment of organic waste gas.
    The drying and bonding process of wood-based panel enterprises should be carried out in the workshop.
    Drying and bonding operations in the open air are strictly prohibited.
    Dryers and hot presses should be sealed, and it is forbidden to stack glue and empty plastic barrels in the open.
    Waste gas from drying, gluing, and hot pressing processes should be effectively collected, and discharged after being purified by photocatalytic oxidation, low-temperature plasma, and biological treatment technologies.

    Strengthen the collection and treatment of organic waste gas.
    The drying and bonding process of wood-based panel enterprises should be carried out in the workshop.
    Drying and bonding operations in the open air are strictly prohibited.
    Dryers and hot presses should be sealed, and it is forbidden to stack glue and empty plastic barrels in the open.
    Waste gas from drying, gluing, and hot pressing processes should be effectively collected, and discharged after being purified by photocatalytic oxidation, low-temperature plasma, and biological treatment technologies.




    10.
    Electronic component manufacturing industry

    X.
    Electronic component manufacturing industry X.
    Electronic component manufacturing industry

    Applicable to the "National Economic Industry Classification" (GB/T4754-2011) in the industry code and category name of C397 electronic component manufacturing industry, including copper clad laminate and printed circuit board manufacturing enterprises.

    Applicable to the "National Economic Industry Classification" (GB/T4754-2011) in the industry code and category name of C397 electronic component manufacturing industry, including copper clad laminate and printed circuit board manufacturing enterprises.




    Promote the use of raw materials with low VOC content.
    Encourage the use of environmentally friendly materials, use inks with low solvent content, and promote the use of water-soluble or light-curing resists and solder resists.
    No organic cleaning agent is used in the board surface cleaning process, and the no-clean process is promoted first.
    Printed circuit board manufacturing companies use low VOCs content ink principle ratio not less than 50%.

    Promote the use of raw materials with low VOC content.
    Encourage the use of environmentally friendly materials, use inks with low solvent content, and promote the use of water-soluble or light-curing resists and solder resists.
    No organic cleaning agent is used in the board surface cleaning process, and the no-clean process is promoted first.
    Printed circuit board manufacturing companies use low VOCs content ink principle ratio not less than 50%.




    Vigorously promote the control of VOCs emissions.
    All workshops involving VOCs emissions must install waste gas collection systems and recycling and purification facilities that meet environmental protection requirements.
    For major pollution-producing links such as the dispensing, coating, and cleaning processes in the manufacturing of copper clad laminates, the printing, electroplating, etching, and hot air leveling processes in the manufacturing of printed circuit boards, the volatile organic waste gas, acid and alkali waste gas, and containing Comprehensive collection of ammonia waste gas, cyanide waste gas, solder fume, etc.
    It is forbidden to install exhaust devices in production workshops and workshops and warehouses that store organic materials such as ink and printing materials, solvents and thinners to directly discharge process waste gas and fugitive organic waste gas into the atmosphere.
    Encourage the use of recycling technology to recycle organic solvents.
    The characteristics of organic waste gas generated by specific production processes in copper clad laminate manufacturing and printed circuit board manufacturing should be combined, and treatment technologies such as photocatalytic oxidation, heat storage/thermal storage catalytic incineration, etc.
    should be used in a targeted manner.
    Organic waste gas with lower concentration can be given priority Adopt the method of combining adsorption concentration and incineration.
    The total purification efficiency of exhaust gas should reach more than 90%.

    Vigorously promote the control of VOCs emissions.
    All workshops involving VOCs emissions must install waste gas collection systems and recycling and purification facilities that meet environmental protection requirements.
    For major pollution-producing links such as the dispensing, coating, and cleaning processes in the manufacturing of copper clad laminates, the printing, electroplating, etching, and hot air leveling processes in the manufacturing of printed circuit boards, the volatile organic waste gas, acid and alkali waste gas, and containing Comprehensive collection of ammonia waste gas, cyanide waste gas, solder fume, etc.
    It is forbidden to install exhaust devices in production workshops and workshops and warehouses that store organic materials such as ink and printing materials, solvents and thinners to directly discharge process waste gas and fugitive organic waste gas into the atmosphere.
    Encourage the use of recycling technology to recycle organic solvents.
    The characteristics of organic waste gas generated by specific production processes in copper clad laminate manufacturing and printed circuit board manufacturing should be combined, and treatment technologies such as photocatalytic oxidation, heat storage/thermal storage catalytic incineration, etc.
    should be used in a targeted manner.
    Organic waste gas with lower concentration can be given priority Adopt the method of combining adsorption concentration and incineration.
    The total purification efficiency of exhaust gas should reach more than 90%.




    11.
    Textile printing and dyeing industry

    11.
    Textile printing and dyeing industry11 .
    Textile printing and dyeing industry

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C171 cotton textile and printing and dyeing finishing, C172 wool textile and dyeing and finishing, C173 hemp textile and dyeing and finishing, C174 Silk spinning and printing and dyeing finishing, C175 chemical fiber weaving and printing and dyeing finishing industry.
    Including textile enterprises with printing and dyeing/dyeing and finishing processes.

    Applicable to the "Classification of National Economic Industries" (GB/T4754-2011), the industry code and category name are C171 cotton textile and printing and dyeing finishing, C172 wool textile and dyeing and finishing, C173 hemp textile and dyeing and finishing, C174 Silk spinning and printing and dyeing finishing, C175 chemical fiber weaving and printing and dyeing finishing industry.
    Including textile enterprises with printing and dyeing/dyeing and finishing processes.




    Vigorously promote the implementation of cleaner production by textile printing and dyeing enterprises.
    Promote the use of environmentally friendly dyes and dyeing auxiliaries with low toxicity and low volatility.
    Key enterprises in the cotton textile and printing and dyeing finishing industries should use medium-temperature and medium-pressure steam shaping instead of heat-conducting oil furnace shaping, and chemical fiber printing and dyeing enterprises are encouraged to develop and apply post-finishing technology that uses steam or natural gas as the heat source for heat shaping.

    Vigorously promote the implementation of cleaner production by textile printing and dyeing enterprises.
    Promote the use of environmentally friendly dyes and dyeing auxiliaries with low toxicity and low volatility.
    Key enterprises in the cotton textile and printing and dyeing finishing industries should use medium-temperature and medium-pressure steam shaping instead of heat-conducting oil furnace shaping, and chemical fiber printing and dyeing enterprises are encouraged to develop and apply post-finishing technology that uses steam or natural gas as the heat source for heat shaping.




    Strengthen the emission control of waste gas from setting machine, printing waste gas and waste water treatment station waste gas.
    The shaping (stenter drying) equipment should be equipped with exhaust gas collection and purification and waste heat recovery devices to ensure that there is no obvious shaping machine smoke and pungent odors in the workshop.
    Use mechanical purification, spray washing, electrostatic dust removal, incineration and other processes or optimized combinations to purify organic waste gas.
    High-temperature waste gas should be recycled through the heat recovery system.
    The waste gas of the stereotypes machine that adopts electrostatic treatment should adopt three or four electric field horizontal types.
    Electrostatic precipitators.
    Companies equipped with a printing section must adopt a closed operation to avoid solvent volatilization, and install a gas hood at the printing workbench.
    After the exhaust gas is collected and purified by adsorption and recovery, the purification efficiency must not be less than 90%.
    The treatment structure of the sewage treatment station shall be covered and sealed, and waste gas collection and treatment facilities shall be set up, and the waste gas shall be discharged up to the standard after collection and treatment.

    Strengthen the emission control of waste gas from setting machine, printing waste gas and waste water treatment station waste gas.
    The shaping (stenter drying) equipment should be equipped with exhaust gas collection and purification and waste heat recovery devices to ensure that there is no obvious shaping machine smoke and pungent odors in the workshop.
    Use mechanical purification, spray washing, electrostatic dust removal, incineration and other processes or optimized combinations to purify organic waste gas.
    High-temperature waste gas should be recycled through the heat recovery system.
    The waste gas of the stereotypes machine that adopts electrostatic treatment should adopt three or four electric field horizontal types.
    Electrostatic precipitators.
    Companies equipped with a printing section must adopt a closed operation to avoid solvent volatilization, and install a gas hood at the printing workbench.
    After the exhaust gas is collected and purified by adsorption and recovery, the purification efficiency must not be less than 90%.
    The treatment structure of the sewage treatment station shall be covered and sealed, and waste gas collection and treatment facilities shall be set up, and the waste gas shall be discharged up to the standard after collection and treatment.




    12.
    Plastic manufacturing and plastic products industry

    12.
    Plastic manufacturing and plastic products industry 12.
    Plastic manufacturing and plastic products industry

    Applicable to the industry code and category name in "Classification of National Economic Industries" (GB/T4754-2011): C2651 primary form plastic and synthetic resin manufacturing, C292 plastic products industry.
    Focus on controlling the manufacturing of primary form plastics and synthetic resins, as well as the manufacturing of solvent-based adhesive tapes, artificial leather, and synthetic leather.

    Applicable to the industry code and category name in "Classification of National Economic Industries" (GB/T4754-2011): C2651 primary form plastic and synthetic resin manufacturing, C292 plastic products industry.
    Focus on controlling the manufacturing of primary form plastics and synthetic resins, as well as the manufacturing of solvent-based adhesive tapes, artificial leather, and synthetic leather.




    Vigorously promote cleaner production.
    Antioxidants, plasticizers, foaming agents and other organic additives used in the production process should be sealed and stored.
    All production processes involving VOCs emissions such as hot melt, injection molding, and drying should be carried out in a closed workshop as much as possible, and must be installed There are waste gas collection systems and purification treatment facilities that meet environmental protection requirements.

    Vigorously promote cleaner production.
    Antioxidants, plasticizers, foaming agents and other organic additives used in the production process should be sealed and stored.
    All production processes involving VOCs emissions such as hot melt, injection molding, and drying should be carried out in a closed workshop as much as possible, and must be installed There are waste gas collection systems and purification treatment facilities that meet environmental protection requirements.




    Strengthen the treatment of VOCs waste gas.
    According to the characteristics of the VOCs emitted by the volatilization of organic solvents and the pyrolysis of polymer compounds during the production of various types of products such as polyethylene, polypropylene, polyvinyl chloride, polystyrene, phenolic, amino plastics, etc.
    , select appropriate recycling and purification treatment technologies.
    The total purification efficiency of exhaust gas should reach more than 90%.
    Each production process unit such as batching, mixing, granulation, extrusion, calendering, foaming, etc.
    should be equipped with waste gas collection and purification treatment devices; the coating production process of tape manufacturing should be equipped with organic waste gas recovery treatment devices.
    Ingredients, feeding, and mixing tail gas should be treated with high-efficiency dust removal devices such as bag dust removal.
    The tail gas of filtration, calendering, and bonding can be recycled and treated by electrostatic demisters.
    Foaming waste gas should be treated by high-temperature incineration technology.

    Strengthen the treatment of VOCs waste gas.
    According to the characteristics of the VOCs emitted by the volatilization of organic solvents and the pyrolysis of polymer compounds during the production of various types of products such as polyethylene, polypropylene, polyvinyl chloride, polystyrene, phenolic, amino plastics, etc.
    , select appropriate recycling and purification treatment technologies.
    The total purification efficiency of exhaust gas should reach more than 90%.
    Each production process unit such as batching, mixing, granulation, extrusion, calendering, foaming, etc.
    should be equipped with waste gas collection and purification treatment devices; the coating production process of tape manufacturing should be equipped with organic waste gas recovery treatment devices.
    Ingredients, feeding, and mixing tail gas should be treated with high-efficiency dust removal devices such as bag dust removal.
    The tail gas of filtration, calendering, and bonding can be recycled and treated by electrostatic demisters.
    Foaming waste gas should be treated by high-temperature incineration technology.









    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.