-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
180 Degree Peel Force Tester - Technical Literature Peel strength refers to the force required to peel a unit width from the contact surface of the materials that are pasted togethe.
The angle of peeling is 90 degrees or 180 degrees, and the unit is: Newton/meter (N/m.
It reflects the bond strength of the materia.
Such as medical tape, pressure sensitive tape, safety film, mobile phone film,et.
The peel strength tester produced by Jinan Sanquan Zhongshi Experimental Instrument is a professional application for adhesives, adhesive tapes, self-adhesives, medical patches, protective films, release papers, composite films, artificial leather, woven bags, film.
, Electronic peeling tester for peeling, breaking and other performance testing of related products such as pape.
The equipment conforms to YY/T0148-2006 "General Requirements for Medical Tapes", GB/T2790, "180° Peel Strength Test of Adhesives", GB/T2791 "T-Peel Strength Test of Adhesives", GB2792 "180° Peel Strength of Pressure Sensitive Adhesive Tapes" Determination", GB4850 "Low Speed Unwinding Strength Test", GB7754 "Shear Strength Test", GB8808 "Laminated Film Peeling Strength Test", ZBY28004 "Heat Sealing Strength Test", GB13022 "Film Tensile Test", GB7753 "Pressure Sensitive Adhesive" Adhesive Tape Tensile Test" and other test method.
Technical parameters Standard pressure roller 2000g±50g Test force 30N Effective range of test force 2%~100%FS Test force minimum reading value 001N Displacement minimum reading value 01mm Test accuracy grade 1 speed range 1~500mm/min stepless speed regulation Speed accuracy≤±2% Specimen width 0<L≤30mm Dimensions 550×370×240 mm (length, width and height) Working temperature 15℃-50℃ Relative humidity 80%, non-condensing working power supply 220V 50Hz 180 degree peel force Tester - Technical Literature
The angle of peeling is 90 degrees or 180 degrees, and the unit is: Newton/meter (N/m.
It reflects the bond strength of the materia.
Such as medical tape, pressure sensitive tape, safety film, mobile phone film,et.
The peel strength tester produced by Jinan Sanquan Zhongshi Experimental Instrument is a professional application for adhesives, adhesive tapes, self-adhesives, medical patches, protective films, release papers, composite films, artificial leather, woven bags, film.
, Electronic peeling tester for peeling, breaking and other performance testing of related products such as pape.
The equipment conforms to YY/T0148-2006 "General Requirements for Medical Tapes", GB/T2790, "180° Peel Strength Test of Adhesives", GB/T2791 "T-Peel Strength Test of Adhesives", GB2792 "180° Peel Strength of Pressure Sensitive Adhesive Tapes" Determination", GB4850 "Low Speed Unwinding Strength Test", GB7754 "Shear Strength Test", GB8808 "Laminated Film Peeling Strength Test", ZBY28004 "Heat Sealing Strength Test", GB13022 "Film Tensile Test", GB7753 "Pressure Sensitive Adhesive" Adhesive Tape Tensile Test" and other test method.
Technical parameters Standard pressure roller 2000g±50g Test force 30N Effective range of test force 2%~100%FS Test force minimum reading value 001N Displacement minimum reading value 01mm Test accuracy grade 1 speed range 1~500mm/min stepless speed regulation Speed accuracy≤±2% Specimen width 0<L≤30mm Dimensions 550×370×240 mm (length, width and height) Working temperature 15℃-50℃ Relative humidity 80%, non-condensing working power supply 220V 50Hz 180 degree peel force Tester - Technical Literature