-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The material parameters of the 180kg/h donkey-hide gelatin concentrate spray dryer are as follows: Material name: The solution of donkey-hide gelatin concentrate with a moisture content of 70-90% PH: about 5 Particle size: about 5 microns Viscosity: high viscosity (no data) water evaporation: ≧180kg/h dried material moisture content: ≤5% solids recovery rate >90% Air is filtered by junior high-efficiency high-efficiency filtration, and the air is filtered for dust particles above 5 microns, heated by steam, and electric heating compensates for the design temperature of the air inlet: 180-200 degrees, The outlet air temperature is 80-90 degrees, and the material temperature is lower than 40 degrees (can be adjusted by the bidder).
There is a primary filter device to filter particles in the air above 10 microns.
High temperature and high efficiency filters filter dust particles above 5 microns.
Equipped with an inlet fan, frequency conversion Control the combination of steam heating and electric heating to ensure that the inlet air temperature is 180-200 degrees, the temperature is adjusted to the steam normally open, and the temperature controller is used to control the electric heating tube to control the temperature.
304 stainless steel material, high-speed centrifugal atomizer is used for thermal insulation, the speed is 12,000 rpm, and the outer wall of the atomizer frequency conversion speed control tower is equipped with four sets of oscillator rapping devices, and there is a cold wall system cavity (main tower) internal pressure display Air temperature display Cold air dehumidification collection system, special closed fan, all stainless steel 304 material
There is a primary filter device to filter particles in the air above 10 microns.
High temperature and high efficiency filters filter dust particles above 5 microns.
Equipped with an inlet fan, frequency conversion Control the combination of steam heating and electric heating to ensure that the inlet air temperature is 180-200 degrees, the temperature is adjusted to the steam normally open, and the temperature controller is used to control the electric heating tube to control the temperature.
304 stainless steel material, high-speed centrifugal atomizer is used for thermal insulation, the speed is 12,000 rpm, and the outer wall of the atomizer frequency conversion speed control tower is equipped with four sets of oscillator rapping devices, and there is a cold wall system cavity (main tower) internal pressure display Air temperature display Cold air dehumidification collection system, special closed fan, all stainless steel 304 material