echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > 2019 special instrument for drug bottle cap detection? List

    2019 special instrument for drug bottle cap detection? List

    • Last Update: 2019-07-04
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    At present, the plastic packaging industry is developing rapidly, especially plastic bottles I believe you are not unfamiliar with the use of plastic bottles everywhere in our daily life For example, drinks, medicines, condiments, etc are packed with plastic bottles Plastic bottles have a strong competitive advantage in the selection of packaging materials For example, in the medical field, plastic bottles are the main packaging equipment for drugs, especially for solid or powder drugs Plastic bottles are often used for packaging, which can not only ensure the safety of drugs, but also greatly reduce the cost In the bottle packaging, the cap plays an important role The cap should not only have good sealing performance, but also be convenient for consumers to open Therefore, some properties of the bottle cap can not be ignored when choosing bottle packaging products Jinan Jingji Testing Instrument Co., Ltd., as an instrument manufacturer with 10 years of experience, has specially compiled a list of special instruments for bottle cap testing The list is as follows: 1 Product application and application scope of cjl-1 bottle cap falling ball impact tester: cjl-1 mechanical falling ball impact tester is mainly used to test the impact resistance of various materials to dynamic load, It is developed for various "impact resistance test of plastic anti-theft bottle caps of packaging containers", which can meet the requirements of gb17876-2010 "plastic anti-theft bottle caps of packaging containers" and carry out ball dropping impact test It is an ideal test equipment for all levels of quality inspection departments and production enterprises of packaging containers and plastic anti-theft bottle caps It is suitable for food, medicine and packaging enterprises to carry out quality control test on product packaging Main technical indexes: 1 Test height: 1000mm; 2 Diameter of steel ball: Φ 41 ± 0.2mm; 3 Mass of steel ball: 286 ± 5g, smooth surface; 4 Dimension of test piece: 230 * 230mm; 5 Boundary dimension: 350 * 450 * 1200mm; 6 Standard configuration: one main machine, one steel ball and one roll ball cover; 7 Weight: 15kg Note: the above is standard configuration and can be customized according to the customer's requirements Jinan Jingji Test Instrument Co., Ltd 2 Cap torque tester nly-20 product model: nly-20 product purpose: The cap torque tester is a kind of intelligent measuring instrument designed and developed for testing various torques It is specially used to detect the opening or tightening torque of the cap It can also measure the torque characteristics of automotive mirrors, door and window wrenches, contact lens caps and other products through special clamps: 1 Microcomputer control, LCD LCD display 2 Continuous collection of test data, automatic peak keeping 3 Double mode design of locking force and opening force 4 Standard unit of test results, no need for manual conversion 5 Test times can be set, data can be deleted, statistical function 6 Power down memory of test parameters 7 Automatic reset, intelligent fault prompt, overload protection 8 Compact size, convenient operation, reliable performance, fast test 9 USB interface output, with synchronous test software 10 N.m, kgf.cm, LBF In mutual conversion technical indicators: 1 Range: 20nm (optional for 40nm); 2 Measurement accuracy: Level 1 accuracy; 3 System resolution: 0.001nm; 4 Clamping range: Φ 5mm ~ Φ 170mm; 5 Statistical quantity: 1 ~ 9 pieces; 6 Power supply: 220V, 50Hz; 7 Quantity: 12kg; standard configuration: host + clamp; 1 set of software; standard: ASTM D 2063, ASTM D 3198, ASTM D 3474 3 Positive pressure cap leak tester mfy-5 model: mfy-5 (positive pressure) product purpose: Mfy-5 positive pressure sealing performance tester is a professional instrument for measuring the positive pressure sealing performance test and sealing quality test of bottles, cans, barrels, tubes, electronic products, toys, air tight parts, aluminum foil and other products developed by our factory It is a sealing performance tester with superior performance and high cost performance The whole machine has a beautiful appearance, the shell is made of spray plastic plates, and all the through and stop parts of air seal are used Adopt imported parts, sealant column PET bottle cap clamp The sealing performance of the cutter is better than that of the same type of machine in China It can maintain the set measurement value for a long time without air pressure compensation The indicator control meter and timing controller adopt the imported joint venture brand, with high measurement value and superior performance It is widely used in food, beverage, medicine, electronic packaging and other enterprises The product design meets the national and international standards, and is an ideal professional testing instrument It can be customized according to any experiment method required by customers Product features: 1 Using manual control to maintain pressure, more convenient operation, more stable performance 2 All pneumatic components are made by famous manufacturers, stable and reliable performance The phenomenon of pressure maintaining instability caused by pneumatic components is eliminated 3 PVC operation panel, pressure digital display, resolution accurate to 0.1kpa, convenient for users to check the pressure value accurately 4 Organic glass (acrylic) barrel can effectively enhance the compressive strength of the sealed barrel and extend the service life Principle of experiment: by inflating the inside of the sample, the pressure difference between the inside and outside of the sample immersed in water is produced, and the gas escaping situation in the sample is observed, so as to determine the sealing performance of the sample Technical parameters: pressure value: 0 -- 200KPa (other pressure values can be customized according to customer requirements) pressure value resolution: 0.01Mpa vacuum barrel: 200 * 200mm (standard configuration) can be customized (300 * 350mm, 400 * 400mm, etc.) exhaust pipe: Φ 8mm Taiwan imported polyester TPU pipe standard configuration: host + actual inspection barrel + gas source line
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.