3 major factors causing the aging of the constant temperature and humidity box

The constant temperature and humidity chamber usually needs to be maintained after use, especially the parts should be regularly maintained and cleaned.
If it is neglected for a long time, it is easy to cause premature aging of the test chamber and damage its service life
.

Now it is Aipei Technology that analyzes the three major factors that make the constant temperature and humidity box prematurely age
.

1.
Lighting factor 2.
Humidity factor 3.
Temperature factor 1.
Lighting is one of the main factors that cause the aging of constant temperature and humidity box products, and some materials have poor light-aging resistance, such as plastics, coatings, etc.
, these products are exposed to light.
will produce different aging phenomena
.

We will also see in our daily life that products that are often exposed to the sun will fade and become old more easily
.

Although the constant temperature and humidity box of the equipment uses cold-rolled steel plate as the outer box material, it is not easy to be aged due to light, but it can still effectively prolong the service life of the equipment when placed in a cool and ventilated place
.

2.
Moisture factors Moisture, rain, and dew are all factors that cause dampness, and dew formed by moisture is the main factor for dampness
.

The power of dew is greater than that of rainwater, and it can adhere to the surface of the box for a longer time, resulting in accelerated aging of the constant temperature and humidity box, so the device cannot be installed in a humid place
.

 　　3.
Temperature factor When the ambient temperature increases, it may lead to an increase in the intensity of light and the degree of damage
.

The location with strong light will generally have a higher temperature, so avoid high temperature heat sources when installing a constant temperature and humidity box
.

 　　The constant temperature and humidity box is composed of two parts: temperature adjustment and humidification
.

Through the rotating fan installed on the top of the box, the air is discharged into the box to realize gas circulation and balance the temperature and humidity in the box.
The data collected by the built-in temperature and humidity sensor in the box is transmitted to the temperature and humidity controller for editing.
Processing, issuing temperature and humidity control instructions, through the air heating unit, the condensation pipe and the heating and evaporation unit in the water tank
.