A brief introduction to the maintenance methods of micro-hole filters

Micro-hole filter is a membrane separation technology, the filter is a cylinder barrel structure, made of stainless steel 304 or 316L, with the folding filter as a filter element, can filter out liquids, gases more than 0.1 m of particles and bacteria.
The device can remove bacteria and particles from the water and liquid injected with water, wash can be reversed, allowing users to different needs can be composed of two, three, four filters, in order to achieve excellent filtration results.
equipment is widely used in medicine, large infusion, pure water, biological engineering sterilization and clarification.
The following small editor briefly introduced the maintenance method of micro-hole filter, as follows: 1, in the removal of impurities, pay special attention to precision filter, not deformation or damage, otherwise, then installed on the filter element, the purity of the filter media can not meet the design requirements.
2, if the filter element is found to be deformed or damaged, need to be replaced immediately.
3, some precision filter, can not be repeatedly used many times, such as bag filter, polypropylene filter, etc.
4, precision micro-hole filter is the core part of the filter filter element, the filter element is composed of special materials, is suitable for damage, need special protection.
5, when the precision micro-hole filter work for a period of time, the filter filter blocked a certain amount of impurities, when the pressure increases, the flow rate will drop, the need to remove impurities in the filter in a timely manner, at the same time to clean the filter element.