Aerosol filling and capping machine is inaccurate or not adjusted.

Aerosol filling capping machine is inaccurate or unfilled How to adjust the main working procedure of the spray filling and capping machine: after the plastic bottle is arranged by the automatic bottle straightening machine, the single row enters the conveyor chain In the filling station, the plunger pump injects the liquid in the container into the plastic bottle After filling, the plastic bottle enters the dividing plate and stops at the capping position accurately Manually place the cover at the entrance of the friction belt line, take out the cover claw, rotate the cover claw, and smooth the tube claw to complete the operation of rotating the cover Then the plastic bottle comes out of the dividing plate and enters the conveying plate chain, and enters the labeling station to complete the labeling of the round bottle How to carry out routine maintenance and maintenance of aerosol filling and capping machine: 1, keep the equipment clean, especially for electrical appliances on the electric dish, moistureproof and dustproof 2 The power supply voltage shall be stable, not more than ± 15% The material temperature shall be kept at 10 ℃ ~ 40 ℃, the ambient temperature shall be kept at 5 ℃ ~ 40 ℃, and the temperature shall be kept at 5 ~ 95% pH 3 The flowmeter used by aerosol filling and capping machine is precision instrument Therefore, oil must be filtered accurately before filling 4 Turn off the power supply and oil inlet valve when the work is not completed 5 Pay attention to the cleanness of the infrared sensor burst out, often wipe it with clean cotton, prohibit any object from approaching the sensor during the working process, and do not have strong direct light or reflection on the sensor, otherwise it will flourish and misoperate 6 Add cylinder lubricating oil to the pneumatic triplet regularly 7 When the machine is not used for a long time, all parts shall be wiped clean and covered with plastic or tarpaulin to prevent dust How to deal with the common problems of spray filling and capping machine: how to do the operation of the cylinder piston of the equipment? 1 confirm whether the safety emergency stop switch is safe 2 confirm whether the gas source switch is turned on 3., confirm whether the one-way signal valve is damaged or not Second How do we deal with the return of the cylinder piston of the aerosol filling and capping machine after being pushed to the top? Do we confirm whether the moving target is in contact with the one-way valve, third, the filling amount of the spray filling machine is not accurate or not adjusted? 1., confirm whether the upper and lower throttle valves are closed or not, 2 increase the speed of the cylinder throttle valve 3 confirm that the fast loading three have the useless hoop lock 4. Confirm that there is enough material in the storage box 5 confirm whether the pipe connection is sealed fourth What do the materials of the spray filling machine cover from the back end of the cylinder? 1 check whether the sealing ring on the piston is worn or not 2 Confirm whether the piston and piston rod are tight Apart from that, in addition to dealing with problems in time, it is also necessary to do preventive work ahead of time Regular daily maintenance can also reduce the failure rate of the filling capping machine The daily maintenance and maintenance of the spray filling and capping machine can not be underestimated This is a key step, and the daily maintenance can effectively extend the service life of the machine and improve the production efficiency of the enterprise To keep the machine in normal operation all day, reduce the loss of human and material resources, and make the manufacturer use the reassuring conscience machine.