echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > All stainless steel super clean table filter detection and stainless steel super clean table use and maintenance

    All stainless steel super clean table filter detection and stainless steel super clean table use and maintenance

    • Last Update: 2016-06-01
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Inspection of all stainless steel super clean bench filter and use and maintenance of stainless steel super clean bench: details of all stainless steel super clean bench: use and maintenance of all stainless steel super clean bench 1 Remove and clean the primary effect filter regularly according to the actual use, and the cleaning cycle is generally 3-6 months (if it is not washed for a long time, dust accumulation will affect the insufficient air intake and reduce the cleaning effect) 2 When the initial effect air filter cannot reach the ideal section wind speed after normal replacement or cleaning, adjust the working voltage of the fan (rotate the knob) to achieve the ideal uniform wind speed (adjust the working voltage of the fan to 80V ~ 90V when the new working table is in use) 3 Generally, after 18 months of use, when the working voltage of the fan is adjusted to Zui high point, and the ideal wind speed is still not reached, it means that the air filter has too much dust (the filter hole on the filter material has been basically blocked, so it needs to be updated in time) Generally, the service life of the air filter is 18 months 4 When replacing the air filter, pay attention to the correctness of the model, specification and size (configured by the original manufacturer), follow the arrow wind direction device, and pay attention to the surrounding sealing of the filter, without leakage Ordering process: 1 Are all stainless steel ultra clean worktables of class 100? Yes, all stainless steel ultra clean worktables are produced according to the U.S federal standard 209E cleanliness, and all of them should be tested before leaving the factory The standard is 0.5 μ m dust particle size, and the filtration efficiency is 99.995%; the worktable produced by our factory can achieve the effect of class 100 cleanliness of 0.3 μ m dust particle size; 2 Can you tell me the specifications and models of all stainless steel super clean worktable? How to choose the model? The conventional all stainless steel super clean worktable can be divided into horizontal and vertical ones, and the number of people can be divided into single and double ones In terms of operation mode, the vertical ones can be divided into single-sided operation, single-sided operation, double-sided operation and double-sided operation; This should be selected according to the specific requirements 3: is it better to choose horizontal or vertical all stainless steel super clean worktable? The horizontal and vertical use effects are the same, both reach the US federal standard 209E hundred level purification In practical application, the general hospital, biological research and pharmaceutical industry will choose vertical, because the vertical is downward air supply, Horizontal is to blow in the direction of people, and some irritant and toxic gases, if blown directly into people, will cause physical injury to people, in this case, it is generally better to choose vertical; while food detection, edible fungus, seed culture generally choose horizontal is better; 4 What is the principle of super clean working table? Working principle: air is inhaled into pre filter through fan, After the medium efficiency filter, the static pressure box enters the filter for filtration, and the filtered air is sent out in the state of vertical or horizontal air flow, so that the operation area can reach the level of 100 cleanliness, and the requirements of production on environmental cleanliness can be guaranteed 5 How long should the fan be turned on before work? Should the UV light be turned on at the same time? Generally, the fan needs to be turned on 15 to 20 minutes in advance before work to make the clean area clean, and at the same time, the UV sterilization lamp needs to be turned on for sterilization and disinfection; the UV disinfection is due to its short wavelength, high frequency, and high photon energy; remember, when personnel work, Please do not turn on the UV sterilization lamp, otherwise it will burn the eyes and skin of the staff; application fields of ultra clean worktable: electronics, medicine, food laboratory, microorganism laboratory Shanghai Sujing Industry Co., Ltd if you have any need, you can pass with us at any time Thank you very much for your support and look forward to cooperating with you Thank you & bestragard! Suing Jinghua
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.