-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The sugar coating machine is mainly used for the production of sugar coating of pills and tablets in the pharmaceutical industry, and can also be used for rolling, mixing and polishing of spherical or granular materials in the food, light industry and chemical industries
.
For example: chocolate polishing, wrapping peanuts, sugaring, seasoning, making glutinous rice balls, pearl powder balls, rolling desiccant, producing chemical fillers, aluminum hydroxide balls, alumina balls, ceramic ball molecular sieves, catalysts, etc.
The following small series are simple Introduce how to use the sugar coating machine? As shown below: 1.
Place the main engine stably, open the oil filling cover, and add lubricating oil to the gear box to the oil mark line
.
2.
Move the spraying bracket to the right side of the main machine, put the spray gun in the main machine's clothes pot, and adjust it to a reasonable position
.
Fill the liquid cup with the coating liquid
.
3.
Turn on the power, turn on the main engine speed control switch, and adjust the main engine speed and rotation direction
.
4.
Connect the gas and liquid pipes to add liquid to the liquid cup, turn on the gas and liquid switches, and adjust the fog width and direction of the spray gun and liquid spray
.
5.
Align the mouth of the hair dryer with the mouth of the pot to adjust the heating temperature and direction
.
6.
After the above procedures are completed, start the main motor and let the machine run idle for 2 minutes in order to judge whether there is a fault.
After confirming that it is normal, the air compressor can be turned on, and the air pressure is about 4~6kg/cm3
.
7.
Feeding: Pour the tablet core to be coated into the coating drum, and transfer the gun bracket and spray gun into the pot to fix it
.
8.
Turn on the power switch.
If necessary, you can turn on the air supply and the internal heating switch to coat the material
.
9.
Discharging: Turn the spray gun and blowing device out of the drum, remove the coating pot, and pour out the material
.
