An article to understand the main structural components of the double cone mixer

Double cone mixer refers to a mixing device that mixes various powders uniformly through a rotating tank
.

Double-cone mixer is a kind of mechanical equipment for conveying powder or granular materials into double-cone container by vacuum conveying or manual feeding, and with the continuous rotation of the container, the material performs complex impact motion in the container to achieve uniform mixing
.

The following editor briefly explains the main structure of the double cone mixer, as shown below: (1) Slip ring box
.

The device used for power distribution, the power lines of the electrical equipment attached to the rotating tank are all input from this
.

(2) Tank body
.

The shape of the container made of steel plate is to set a short cylinder between two cones.
The top angle of the cone is determined according to the angle of repose of the mixed powder.
In order to facilitate the discharge, it should be designed to be 90° or 75°.
The inlet and outlet ports of the tank are equipped with pneumatic valves or electric butterfly valves
.

For the opening and closing of loading and discharging
.

 　　(4) Drive device
.

 　　It consists of a motor, a reducer and a transmission gear
.

The number of revolutions of the motor is adjustable within a certain range
.

In order to ensure the accurate parking position of the tank, it is necessary to decelerate at the last turn before parking, and the whole operation process can be automatically controlled
.

 　　(3) Support stand
.

 　　Metal structural frame for supporting tanks, transmissions,
etc.