echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Anti-solvent thinner corrosion is protected with strong oxidation and anti-corrosion coatings

    Anti-solvent thinner corrosion is protected with strong oxidation and anti-corrosion coatings

    • Last Update: 2021-01-17
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    Solvent dilute material is a large group of organic compounds widely used in life and production, molecular weight is not large, dissolved dilution ability is strong, volatile fast, organic solvent thinner includes a variety of substances, such as streptomylated alkanes, olefins, alcohols, aldehydes, amines, esters, ethers, ketones, aromatic hydrocarbons, terpenes, halogens, nitrogen-containing compounds and sulfur-containing solvents. However, most of the organic solvent material is easy to burn, highly corrosive solution, which requires the installation of organic solvent thin material equipment utensils to have good corrosion resistance. Years of research and development and production of ZS-1032 anti-oxidation anti-corrosion coating, resistance to low, high temperature organic solvent thin material corrosion, synthetic material composition, no flat broken chain without aging problems, safe and reliable anti-solvent thin material corrosion coating.
    chain alkanes, olefins, alcohols, aldehydes, amines, esters, ethers, ketones, aromatic hydrocarbons, hydrocarbons, terpenes, halogenated hydrocarbons, heterocyclics, nitrogen-containing compounds and sulfur-containing compound solvents, at low temperature, at room temperature, strong solubility, but also bring corrosion-rich containers, bringing certain material damage and a certain risk. Long-term research by anti-corrosion coating researchers has concluded that the corrosion of organic solvent thinners is divided into two categories: the corrosion of polar organic solvents and the corrosion of non-polar organic solvents. In non-polar solvent thinners, ion compounds are insoluble, difficult to ionization, low conductivity, and less likely to occur electrochemical corrosion. In polar solvent thinners, the polarization rate of solvents is large, ion compounds are soluble, conductivity is large, and the same conductive solution as aqueous solutions can be formed and electrochemical corrosion of substrates occurs. Anticorrosive coating engineers point out that when non-proton polar solvents are mixed into electrolytes, they become conductive solutions. The conductivity of the solution is related to the polarity of the solvent material, the greater the polarity of the solvent material, the easier it is to dissolve the electrolyte, the higher the conductivity, the more prone to electrochemical corrosion. At room temperature, organic solvent thinners hardly corrode metals, when mixed with electrolyte impurities, improve the conductivity of the solution, it is easy to occur electrochemical corrosion of substrates.More than
    years of research and development testing, the development and production of ZS-1032 strong oxidation coating using Teflon, heavy crystal, scale-like graphene and other materials high temperature passivation chelation, coating curing, high inertness, temperature resistance of up to 250 degrees C, high density coating, material molecules are not easy to lose electrons, coating anti-swelling performance is good. ZS-1032 strong oxidation coating can withstand strong oxidizing materials such as strong oxidizing materials such as strong acid solution (salt, sulfur, nitro), strong intermediates, polar solvent thinner oxidation corrosion, but also resistant to aviation kerosene and other oil penetration corrosion. ZS-1032 anti-oxidation coatings in non-polar solvents in gasoline, jet fuel oil, etc., in the solution of thick acid nitric acid, sulfuric acid, sulfuric acid, etc., in butyl acetate, xylene, butyl ketones In the high polar solution of waterless ethanol, after 500 hours of immersion at 100 degrees C, the swelling rate of ZS-1032 anti-oxidizing anti-corrosion coating was not more than 5 inches.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.