-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The application advantages and precautions of short-range molecular distillation instrument work speed, corresponding to the water ring thickness of the actual working water temperature and gas hole arrangement are several factors, the pumping volume, work efficiency and compression compared to the decisive role.
when you choose refrigeration products, according to the required temperature range, experimental heat, choose the temperature range, cooling capacity to match the product model, in order to achieve good experimental results.
different forms of connection, they can be divided into downstream, counter-current and co-streaming.
usually have a double-effect, three-effect or even more effective evaporation system, but the more series, the more control points, the lower the temperature differential driving force at all levels, depending on the actual feasibility.
-range molecular distiller has the following obvious advantages over conventional distillation technology in the practical industrial application: 1, molecular distillation provides a separation method for the separation of high boiling point, thermal and oxidizing materials.
Because molecular distillation operates at temperatures well below the boiling point of the material, and the material stay time is short; 3, molecular distillation can selectively steam the product of purpose, remove other impurities, through multi-stage separation can be separated at the same time more than 2 kinds of substances;
: 1. Check that the cooling water import and export valve is open normally and the pressure is normal.
2. Check that the import and export valves for cooling water in each component are open.
3. The equipment is heated with hot oil and the temperature is high, so do not touch it with your hands.
4. Check that ethanol in the low temperature thermostat is sufficient.
. Pay attention to the adequacy of liquid nitrogen in liquid nitrogen barrels.
6. Check that the cold well is connected to the device.