Are these problems encountered in the use of the high round bottle labeling machine?

What is the working principle of the high round bottle labeling machine? In fact, the working principle of the high round bottle labeling machine is not complicated The bottle is sent to the chain plate by the previous assembly line The bottles are arranged equidistant by the distance adjusting device and enter the photoelectric sensing area The drum label controlled by the stepping motor is sent automatically after getting the signal, and the automatically peeled label is correctly pasted on the bottle body Another group of photoelectric sensors timely limit the delivery of a label paper In the process of continuous bottle feeding, the winning paper is correctly pasted on the bottle one by one After being flattened by the roller, it is automatically output to complete the whole labeling process We can see from the principle of the above-mentioned high round bottle labeling machine that the round bottle labeling machine can greatly save the labor and material resources of the factory assembly line The factory can save this part and use it as other The labeling automation equipment can be designed and customized according to the technological requirements of the enterprise users Its operation is convenient, flexible and not single, and its functions can be based on the users Compared with the ordinary round bottle labeling machine, it has more room for change The high round bottle labeling machine is a labeling machine suitable for PET bottles, plastic bottles, glass bottles, metal bottles and other round bottles The design is beautiful and small The aluminum alloy bracket and the function is weak The function is weak and the operation is simple We will introduce the detailed operation method of the high round bottle labeling machine in detail 1、 The labeling position of the high round bottle labeling machine does not fluctuate 1 The pressing belt can not be pressed tightly, which causes the label belt to be loose and the electric eye detection is not accurate Compact label handling 2 It is possible that the traction mechanism is slipping or not compacted, so that the bottom paper can not be taken away smoothly Press the traction mechanism to handle If it is too tight, the label will be crooked It is better to pull the base paper normally (usually if the bottom paper is wrinkled when pulled out, it should be pressed too tightly.) 3 The shape of the object to be pasted is different or the location is different Control the quality of goods 4 The object to be pasted shall be placed in parallel with the direction of the label (pay attention to whether the goods can move during the labeling process, and the right support rod can be properly improved a little bit compared with the left one) 5 The object to be pasted shall rotate smoothly on the labeling station (pay attention not to touch the stripping board) When the object is too light, the marker rod shall be put down to press the object to be pasted 6 In the double label mode, after the single label (1) is released, the workpiece rotates continuously, because there is no delay for setting the second label, the machine is in the mode of waiting for the second label labeling signal (2) After a single label is issued, the workpiece stops The reason is that there is signal disturbance (reset the electric eye) in the marking eye, or the delay control is abnormal (click two times of inching 2, and then click two times of inching 1) Secondly, the mark removal deviation of the high cylinder labeling machine is 1, the pressure belt is installed too tightly, forming the mark removal deviation, and the pressure belt strength is increased 2 Before the automatic operation is stopped, the tape correction is not stopped Stop the correction again 3、 The labeling quality of the high round bottle labeling machine is not good, there are bubbles or wrinkles 1 The labeling is incomplete, which can reduce the speed of labeling 2 It can be a clear label Maybe the label is too soft 3 If the gravity of the bid overlay is not adjusted properly, it is important to adjust the strength of the bid overlay 4 There are wrinkles at the beginning of labeling, which can be that the label is too soft, the label has been bent when it is extended, and the position of lifting the label stripping board is as close to the commodity as possible 5 The front and back of the label are not aligned Adjust the inclination of the support rod to make the product perpendicular to the extension direction of the label Adjust the inclination of the support rod 2 through two screws 1 and 3 to correct the head tail connection error of the label 6 Move the commodity in another direction during the labeling process of the high round bottle labeling machine, and slightly raise the support seat on the right side of the support rod.