Austrian tecsense oxygen analyzer is used to monitor oxygen content in centrifuge reactor of pharmaceutical process

Key words: imported optical oxygen analyzer, corrosive gas oxygen analyzer, Austria tecsense oxygen analyzer, online oxygen analyzer, Austria tecsense oxygen analyzer is used to monitor the oxygen content in the reaction kettle of the pharmaceutical process centrifuge to ensure safety, Austria tecsense oxygen analyzer is used to monitor the oxygen content in the reaction kettle of the pharmaceutical process centrifuge to ensure safety All, new news of Austrian tecsense oxygen analyzer A pharmaceutical company located in the UK decided to use the teccontrol oxygen analyzer of Austrian tecsense company on all centrifuge reactors to monitor the oxygen content and prevent explosion The new Austrian optical oxygen analyzer has the advantages of high cost performance and corrosion resistance that electrochemical oxygen analyzer cannot It is a pharmaceutical factory Necessary oxygen analyzer products for centrifuge reactor Tecsense oxygen analyzer in Austria is used to monitor the oxygen content in the reaction kettle of centrifuge in pharmaceutical process to ensure the safety of oxidation reaction It is an important reaction type in the production process of chemical process It is a production process that must be passed for the preparation of many chemical raw materials and intermediates Oxidation is a process of electron loss in chemical reactions with electron transfer, that is, the process of increasing oxidation value Most of the oxidation reactions of organic compounds show that the raw materials get oxygen or lose hydrogen Oxidation reaction is a dangerous type of exothermic reaction If the oxygen content in the gas phase is too high in the reaction process, it is easy to cause deflagration and cause process reaction out of control, which may cause equipment damage, environmental pollution, material economic loss, or personal injury and death Therefore, according to the requirements of the State Administration of work safety, the oxidation reactor must be equipped with gas-phase oxygen content detection instrument Tecsense oxygen analyzer in Austria is used to monitor the oxygen content in the reaction kettle of centrifuge in pharmaceutical process to ensure safety in production and prevent production safety In addition to alarm and interlock of reactor temperature and pressure, proportional control and interlock of reaction materials and emergency cut-off power system, emergency cut-off system, emergency cooling system and emergency nitrogen filling system, gas-phase oxygen content monitoring, alarm and interlock system are also basic requirements of safety control, and gas-phase oxygen content is one of the key process parameters monitored In the process of selecting gas phase oxygen analyzer for oxidation reactor, the customer fully considered the particularity and danger of the process Process hazard characteristics: the reaction raw materials and products have the risk of combustion and explosion The reaction raw materials include esters, alcohols, catalytic oxidants, sodium hypochlorite strong oxidants, etc the composition of reaction gas phase is easy to reach the explosion limit, with the risk of flash explosion The materials in the reaction process are highly corrosive Because of the presence of sodium bromide and sodium hypochlorite in the added materials, the reaction gas phase contains corrosive hydrogen bromide and Cl? Gas The Austrian tecsense oxygen analyzer is used to monitor the oxygen content in the reaction kettle of the centrifuge in the pharmaceutical process to ensure the safety of the traditional solution The traditional analysis method is to use the electrochemical oxygen analyzer or the magnetic oxygen analyzer supporting the pretreatment system for analysis, because the reaction materials contain esters, alcohols, hydrogen bromide, CL? The effect of oxygen analyzer and pretreatment system is not ideal The fuel cell of the electrochemical oxygen analyzer is frequently replaced Due to the particularity of its production products and process materials, the fuel cell of the electrochemical oxygen analyzer is very easy to fail, which requires frequent replacement of the fuel cell for normal analysis The cost of instrument spare parts is high, and the long-term operation and maintenance cost of the instrument is large Basically, the sensor needs to be replaced every month The oxygen sensor components of the magnetic oxygen analyzer are prone to failure The oxygen sensor components of the magnetic oxygen analyzer are very precise, susceptible to the influence of dust, water vapor and corrosive gas, and prone to failure The regular maintenance of the oxygen sensor also increases the long-term operation and maintenance costs of the user instrument Corrosion problem of sample transmission stainless steel pipeline and components of pretreatment system: due to the presence of trace hydrogen bromide, CL? And water in the gas phase material of oxidation reactor, it is bound to cause corrosion to the sample transmission stainless steel pipeline and related auxiliary components of pretreatment system, and there are hidden dangers in the long-term normal and safe operation of pretreatment system It is difficult to maintain and calibrate, and the workload is large Because the sample gas background contains medium components that are easy to damage magnetic oxygen and electrochemical sensors, and contains hydrogen bromide and Cl? Gas, which are easy to corrode the sample stainless steel transmission pipeline, etc., the workload of system maintenance and calibration is large, In addition, if the spare parts cannot be supplied in time after the failure, it is difficult to repair them in a short time, and the system is often in a semi paralyzed state Tecsense oxygen analyzer in Austria is used to monitor the oxygen content in the reaction kettle of centrifuges in pharmaceutical process to ensure that the safety measurement is not accurate, the data reliability is poor, the system failure rate is high, the measurement of oxygen content in the gas phase of oxidation kettle is not accurate, and the measurement data reliability is poor, which can not be used as the basis for safety monitoring measures of relevant process operation The price of laser oxygen analyzer in the market is 100000-200000 yuan, which is too high Compared with these traditional products, Austrian tecsense oxygen analyzer has high cost performance This is also the reason why all the oxygen content analyzers in centrifuge reactor of pharmaceutical factory choose Austrian tecsense oxygen analyzer one after another Austrian tecsense photoelectrochemical oxygen analyzer analysis solution and advantages in the traditional magnetic oxygen or electrochemical oxygen analyzer system, the daily maintenance of the sample pretreatment system is the main work The photoelectric chemical oxygen analyzer can be installed in situ, completely eliminating the sampling system, no sample transmission pipeline, no transmission parts, no consumable parts, avoiding many fault points that may affect the measurement, greatly reducing the workload of system maintenance and low operating cost It has the characteristics of in-situ installation and adopts the probe type design, which is easy to install and adjust the optical path and consumes less nitrogen For the characteristics of the gas-phase medium in the oxidation kettle containing trace hydrogen bromide and Cl? Corrosive medium, the part contacting with the material is made of corrosion-resistant metal material, which effectively solves the corrosion problem of the instrument caused by trace corrosive gas With the probe design, the laser emitted by the laser source is reflected by the right angle prism of the probe head in parallel to the laser receiver on the same side of the laser source, forming a folding optical path This design has some technical features in practical use: single flange installation, without two side focusing laser passing through the gas twice, the effective optical path is doubled, Higher accuracy, smaller size, easy to install in a small space Austria tecsense oxygen analyzer real-time monitoring, further improving the accuracy of measurement, predictive maintenance cycle prompt function changed from passive maintenance to active maintenance, effectively ensuring the safety and reliability of the production process More Austrian tecsense oxygen analyzer is used for monitoring oxygen content in reaction kettle of centrifuge in pharmaceutical process Please call yingxiao instruments (Shanghai) Co., Ltd for safety information