Automatic automatic filling machine precision control and equipment maintenance Regular maintenance

1.
Controlling the filling accuracy of the automatic filling machine: 1.
The filling error is mainly determined by the filling volume, filling speed, and switching speed of the upper and lower valves
.

The switching speed of the upper and lower valves is related to the viscosity of the product.
The higher the viscosity, the slower the valve switching speed
.

2.
The spring pressure to adjust the valve should be determined by the test filling measurement and the operator's experience
.

3.
The switching speed of the thickening valve mainly adjusts the spring pressure of the valve
.

As the spring pressure increases, the valve opens and closes faster
.


2.
Regular maintenance of the automatic filling machine: 1.
The body of the automatic filling machine is made of stainless copper.
Do not scrape its surface with sharp and hard tools
.

 　　2.
When dismantling and washing the pipeline, remove the fixing screws at the same time, so as not to affect the other process requirements during disassembly
.

 　　3.
Before cleaning the pipeline, the remaining products in the pipe should be cleaned, and then the material bucket should be filled with gentle cleaning liquid
.

The company recommends using warm water
.

Use soapy water, alcohol or other cleaning solution if needed
.