Caution in the use of the thickness gauge

1.
When measuring, first do the preparation steps, such as the insertion link of the probe and the switch of the machine, after turning on, when the information before the last shutdown has been displayed on the screen, it means that the operation can be started
.
2
.
Then there is the adjustment of the speed of sound, and the adjustment of the speed of sound is necessary.
3.
After adjusting the sound velocity, it is necessary to start calibration, calibration is very necessary, whether it is after replacing the battery or probe, the machine should be calibrated, and the calibration will affect the measured data
if it is not done well.
4.
Finally, the measurement is carried out, and the probe can be automatically measured by coupling it with the measured material, and the specific measurement data information
will be displayed on the screen.
The equipment meets a number of national and international standards: ISO 4593, ISO 534, ISO 3034, GB/T 6672, GB/T 451.
3, GB/T 6547, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817, GB/T 24218.
2