echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Cleaning method of medical heating circulation device

    Cleaning method of medical heating circulation device

    • Last Update: 2022-06-17
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    The medical heating circulation device is composed of different components, and the cleaning methods are different due to the different components
    .

    The following editor will introduce to you how to clean the device after a period of use
    .


    1.
    The ground around the fuselage and the bottom should be kept clean at all times to avoid a large amount of dust being sucked into the unit and causing accidents and reducing the performance of the equipment
    .

    2.
    When the user operates the medical heating cycle device, he needs professional management and maintenance.
    The qualified unit should send a special person to the supplier's factory for training and learning from time to time, so as to obtain professional maintenance and repair experience and ability
    .

    The condenser should be cleaned every three months.
    For air-cooled cooling, the condensing fan should be regularly inspected and the condenser should be decontaminated and dedusted to ensure good ventilation and heat exchange performance.
    In addition to the pressure and inlet water temperature, the corresponding flow rate must be guaranteed, and the interior of the condenser should be cleaned and descaled regularly to obtain its continuous heat exchange performance
    .

    , 3.
    Please do not debug the setting values ​​of the two over-temperature protectors in the distribution box.
    They have been set before leaving the factory.
    This protection switch is used to protect the heating tube from empty burning and alarm
    .

    4.
    It is also necessary to set the temperature near the ambient temperature after each experiment, cut off the power after working for about 30 minutes, and then wipe the inner wall of the work room
    .

    When it is not in use for a long time, the product should be powered on regularly every two weeks, and the power-on time should not be less than 1 hour
    .

    5.
    The high-current contacts of the power distribution board should be cleaned and repaired at least once a year in the power distribution room.
    The dust blockage will burn out the components in light, and cause fire in serious cases
    .

    When cleaning, use a vacuum cleaner to absorb the indoor dust
    .

      6.
    Because the medical heating circulation device is basically composed of electrical, refrigeration and mechanical systems
    .

    Therefore, once there is a problem with the equipment, the entire equipment system should be checked and comprehensively analyzed
    .

    Generally speaking, the process of analysis and judgment can be done from the outside to the inside, that is, after eliminating the external factors first, the fundamental fault phenomenon is systematically decomposed to the equipment
    .

      Users need to customize the maintenance plan for the medical heating cycle device, and must not blindly disassemble or replace parts to avoid unnecessary trouble
    .

    I believe that everyone has already memorized the above points by heart
    .

    So keep cleaning the equipment
    .


    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.