Coating classification: nano composite light storage coating

Core tip: brief introduction: nano composite light storage coating is a special light-emitting coating made by using the principle of light absorption and light storage of rare earth elements After absorbing any visible light, such as natural light and light, nano composite light storage coating will automatically light up, with bright color and long light-emitting time (10-15 min after normal light source irradiation, sustainable light-emitting in dark place 8 More than h), it can be used with other coatings to form a variety of effects, such as moving picture and painting in picture Nano composite light storage coating is a new type of coating with excellent performance Features: the characteristics of nano composite light storage coating are as follows: 1) nanometer Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coating home news: Introduction: nano composite light-emitting coating is a special light-emitting coating made by using the principle of rare earth elements absorbing and storing light After absorbing any visible light such as natural light and light, nano composite light-emitting coating will automatically light up, with bright color and long light-emitting time (10-15 min after normal light source irradiation, sustainable light-emitting in dark place 8 More than h), it can be used with other coatings to form a variety of effects, such as moving picture and painting in picture Nano composite light storage coating is a new type of coating with excellent performance Features: the characteristics of nano composite light storage coating are as follows: 1) the film of nano composite light storage coating is tough, with strong adhesion, long afterglow time and high brightness; 2) the light resistance, weather resistance and chemical stability of nano composite light storage coating are good; 3) the nano composite light storage coating does not precipitate, and the construction is simple; 4) Nano composite light storage coating is non radioactive, non-toxic and harmless, safe and environmental protection, and meets the characteristics of environmental protection coating Technical indicators: see the following table for the technical indicators of nano composite light storage coating: no caking in the container, no obstacle for two layers of uniform construction, low temperature stability, no deterioration, drying time (surface dry) / h ≤ 2, continuous light-emitting time (irradiation 10-15 min) / h ≥ 8, alkali resistance, 24 h, no abnormal washing resistance, 1000 times, no abnormal Construction: Ø The base surface to be applied for bottom treatment must be flat, firm, dry and clean The uneven part can be filled with water-resistant putty, and the base surface shall be free of oil stain and floating ash It is recommended to use supporting alkali resistant sealing primer to treat the base surface Ø construction method nano composite light storage coating can be applied by spraying, brushing and other construction methods Generally, the coating is applied twice with an interval of 1-2 h, whichever is dry When diluting, the coating should be stirred evenly and diluted with 5% - 15% water Ø the reference dosage is about 12 m2 / kg, depending on the roughness of the painted wall Note 1) the coating product belongs to safe and non-toxic product, non-toxic and non combustible, and is transported as non dangerous goods 2) The temperature at the construction site should not be lower than 4 ℃, and construction is strictly prohibited below 0 ℃ 3) After the completion of construction, the appliances shall be cleaned with clear water immediately Storage and transportation: nano composite light storage coating shall be stored in a dry, cool and ventilated place, away from heat source and fire source, and shall be protected from direct sunlight, rain, inversion, etc Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,