Coating classification: synthetic resin epoxy coating

Core tip: Introduction: synthetic resin epoxy coating is an epoxy coating with synthetic resin (phenolic, acid polyester, urea formaldehyde resin, etc.) as curing agent, mainly including epoxy phenolic coating, epoxy amino coating, epoxy amino alkyd coating, etc Epoxy phenolic coating is one of the best anticorrosive coatings, which has excellent performance Features: the features of synthetic resin epoxy coating are as follows: ① The synthetic resin epoxy coating has outstanding chemical resistance, good decoration and mechanical properties; ② Synthetic epoxy coating must be baked at high temperature（ Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Home of coatings: Introduction: synthetic resin epoxy coating is an epoxy coating with synthetic resin (phenolic, acid polyester, urea formaldehyde resin, etc.) as curing agent, mainly including epoxy phenolic coating, epoxy amino coating, epoxy amino alkyd coating, etc Epoxy phenolic coating is one of the best anticorrosive coatings, which has excellent performance Features: the characteristics of synthetic resin epoxy coating are as follows: ① the synthetic resin epoxy coating has outstanding chemical resistance, good decorative and mechanical properties; ② the synthetic resin epoxy coating can only be dried after high temperature baking (about 150-200 ℃), which limits its application on large objects Construction matters: ① the paint film of synthetic resin epoxy coating is very deep and cannot be used as light paint; ② orange peel and other problems often occur in the paint film during the construction of synthetic resin epoxy coating, and leveling agent can be added; ③ the curing speed can be increased, and a small amount of acid (phosphoric acid) catalysis can be added, and the dosage is 1% - 2% of the total nonvolatile content of varnish; ④ To improve the performance of the paint film, multi-channel construction can be used Pay attention to the baking conditions The baking temperature of the middle layer is 90-150 ℃, the time is 10-30 min, and the baking temperature of the last layer is 180 ℃, the time is 60 min Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,