Coating formula: high-grade external wall water-based fluorocarbon coating formula

Core tips: high grade exterior wall waterborne fluorocarbon coatings formulation formula ratio (mass fraction) /%, formula formulation ratio (mass fraction) /% water wetting agent FC-3 dispersant 8030A film forming AIDS Texanol titanium dioxide R-706 superfine heavy calcium 15.001 0 501 23 7.80 defoamer CF16 fluorocarbon emulsion PF-1 bactericide K20 ammonia water 28% thickener PR-328 leveling agent L-1500 4050 000.100.100 600.50 wetting agent Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coatings home news: high grade exterior wall waterborne fluorocarbon coatings formulation formulation ratio formula (mass fraction) /% formulation ratio (mass fraction) /% water wetting agent FC-3 dispersant 8030A film forming AIDS Texanol titanium dioxide R-706 superfine heavy calcium 15 1 0.50 1 23 7.80 defoamer CF16 fluorocarbon emulsion PF-1 bactericide K20 ammonia water 28% thickener PR-328 leveling agent L-150 0.40 50 Fc-3: a cationic surfactant of perfluoroalkyl ether quaternary ammonium salt, which can be used as emulsifying, dispersing and wetting agent in acid medium Shanghai Yingzheng Technology Co., Ltd Defoamer cf16: non-ionic surfactant, used for defoaming emulsion paint and adhesive Generally, it can be used directly It is recommended to add one half in the pigment grinding stage and the other half in the paint mixing stage The addition amount depends on the specific situation The typical addition amount is 0.1% - 0.s% Beijing Saideli Technology Co., Ltd Fluorocarbon emulsion PF-I:PF-I waterborne fluorocarbon emulsion is a pure acrylic ester and special fluoropolymer copolymer anionic emulsion PF-I has extraordinary cold and hot water resistance, anti fouling and weatherability It has excellent adhesion and anti pulverization properties to masonry building surface, and is especially suitable for preparing latex paint with light, semi gloss and gloss, especially when preparing dark exterior wall latex paint Significantly improve the "tear mark" phenomenon Guangzhou zhongguanmei Co., Ltd Thickener pr-328: it is an acrylic base swelling anionic concordant thickener Designed for flat to high gloss interior and exterior wall coatings, it has excellent fluidity, leveling and splash resistance, as well as good anti microbial properties The preparation method is to mix water, titanium dioxide, superfine calcium carbonate, wetting agent FC-3, dispersant 8030A and some defoamer CF16, and grind it to a certain fineness in the sand mill, then add fluorocarbon emulsion PF-1, film builder assistant Texanol, bactericide K20, leveling agent L-150, residual defoamer CF16, and mix evenly Finally, adjust the pH value by ammonia water, slowly add thickener pr-328 to adjust the viscosity of the coating Note: for exterior walls Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,