Coating general knowledge: construction scheme of T-type thermal insulation coating

Core tip: the following aspects should be paid attention to when carrying out the construction of light emulsion paint (1) The construction viscosity of light emulsion paint should be well controlled, and it is better not to add water to adjust the viscosity at will on the construction site In the process of coating preparation, the viscosity of the coating is increased by adding a proper amount of thickener, but the solid content of the coating is not changed If water is mixed arbitrarily, the solid content of the coating will be reduced, the concentration of the base material and pigment will be reduced, and the luster will be reduced (2) The base material shall be smooth, flat and clean If the base material is not flat, the putty with good bonding strength shall be used for leveling As exterior wall coating, it is better to use it with certain water resistance Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Paint Home News: when carrying out the construction of light emulsion paint, the following aspects should be paid attention to (1) The construction viscosity of light emulsion paint should be well controlled, and it is better not to add water to adjust the viscosity at will on the construction site In the process of coating preparation, the viscosity of the coating is increased by adding a proper amount of thickener, but the solid content of the coating is not changed If water is mixed arbitrarily, the solid content of the coating will be reduced, the concentration of the base material and pigment will be reduced, and the luster will be reduced (2) The base material shall be smooth, flat and clean If the base material is not flat, the putty with good bonding strength shall be used for leveling As exterior wall coating, it is better to use matching putty with certain water resistance (3) The temperature and humidity of the construction environment are strictly required It shall not be lower than the minimum film forming temperature of the coating, otherwise the coating is discontinuous, powdery and easy to fall off If the temperature is too high and the relative humidity is too low, the lapping is not good and the brush marks are serious, which will affect the luster Try to avoid construction in windy, rainy and other severe weather conditions Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,