echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating knowledge: common problems and solutions of emulsion paint

    Coating knowledge: common problems and solutions of emulsion paint

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tips: the common quality defects of emulsion paint coating are blistering, anti alkali powder dropping, sagging, bottom penetration, uneven coating, etc (l) Blistering: the main reasons are improper treatment of the base course, too thick coating, especially blistering when the large core plate is used as the base course In addition to mixing the coating evenly before use and mastering the consistency of the paint liquid, 107 glue can be brushed on the bottom putty layer once before brushing During rework and repair, the blistering and peeling place shall be cleaned, and 107 glue shall be applied before repair (2) Anti alkali powder removal: the main reason is that the base course is wet without drying, and the main reason is that the primer is not brushed and the paint is too thin If found Shenyang steel structure fireproof coating construction expert punde Building Fire Engineering Co., Ltd Recommended introduction: since its establishment, Shenyang punde Construction Fire Engineering Co., Ltd has cultivated a group of professional construction teams with excellent equipment, rich experience and serious responsibility with advanced and scientific management methods and strict engineering quality assurance and after-sales service system It has undertaken a number of fire system installation projects, which has been praised by customers Every idea and special requirement of you will be fully considered by us and fully realized in the construction technology, which will become the cornerstone of our successful long-term development We are looking forward to your invitation, to provide you with quality services and high-quality technical support! All construction coatings have passed ISO9001 Paint Home News: the common quality defects of latex paint coating are blistering, anti alkali powder falling, sagging, bottoming and uneven coating (l) Blistering: the main reasons are improper treatment of the base course, too thick coating, especially blistering when the large core plate is used as the base course In addition to mixing the coating evenly before use and mastering the consistency of the paint liquid, 107 glue can be brushed on the bottom putty layer once before brushing During rework and repair, the blistering and peeling place shall be cleaned, and 107 glue shall be applied before repair (2) Anti alkali powder removal: the main reason is that the base course is wet without drying, and the main reason is that the primer is not brushed and the paint is too thin If the anti alkali powder is found, it shall be reworked and repainted, the painted materials shall be removed, and the construction shall be carried out after the base course is completely dry In the construction, the sealing primer must be brushed once first, especially for the new wall, the consistency of the top coat should be appropriate, and the white wall should be slightly thicker (3) Sagging: the main reason is that the viscosity of the coating is too low and the coating is too thick During the construction, the consistency of the coating must be adjusted, and too much water shall not be added During the operation, the pen must be dipped frequently, less, and more smoothly to avoid sagging and flowing In case of sagging, the paint film shall be polished with fine sandpaper after drying, and the finishing coat shall be painted again after the finishing is cleaned (4) Bottom penetration: mainly because the coating is too thin, the number of times is not enough or the material quality is poor The products with high solid content and strong covering power shall be selected in the construction In case of bottoming, the number of times of painting the top coat shall be increased to meet the painting standard of the wall (5) Coating is not smooth: the main reason is that there are impurities in the paint liquid, the paint liquid is too thick, and the quality of emulsion paint is poor The brand with good levelness shall be used in the construction, and the paint liquid shall be filtered before the final painting The paint liquid shall not be too thick If the coating is not smooth, it can be polished with fine sandpaper and then painted with the top coat again (6) Cracks: the construction temperature is too low to reach the film-forming temperature of the emulsion paint, so the continuous film cannot be formed; improper treatment of the base course: such as the film cracking caused by the wall cracking; the first coating is too thick and not completely dry, i.e the second coating is applied, which causes the film cracking due to the different drying speed inside and outside Cracking of the cement putty to be scraped causes cracking of the coating (7) Falling off: the main reason is that the construction temperature of the emulsion paint is low, and the continuous film fails to form and cracks, which will fall off in case of water; the base layer is loose, and there are oil stains and other dirt, and the film adhesion with the base layer is not good, resulting in peeling off; the base layer has low putty strength, and the putty layer is painted with emulsion paint before it is dry; the base layer is too smooth, resulting in poor adhesion of the film Exfoliation: prevention: observe before construction, if there is leakage, ask relevant departments to solve it in time, and add special treatment It is recommended to use durable and waterproof elastic batch to dare to pre treat the wall surface, and then paint according to the routine The wall must be cleaned during construction (8) Discoloration and fading: some walls have too high temperature, long sunshine time, or water-soluble salt crystallizes on the wall surface, which causes discoloration and fading of emulsion paint; some walls contain too high alkali value, which infringes the weak alkali resistant pigment or resin and causes discoloration and fading; Do not use both emulsion reading and polyurethane paint at the same time You can apply emulsion paint two days after the paint is applied, or after the emulsion paint is completely dry (7 days at 25 ℃) Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.