echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating knowledge: construction environment requirements for water in water multicolor paint

    Coating knowledge: construction environment requirements for water in water multicolor paint

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: water in water multi-color coating is a new type of coating product in the 21st century, which brings new development advantages to the construction and decoration industry However, the construction quality of the coating product needs to be very particular, which is a relatively complex process We generally consider the following conditions: 1 Raw material selection: good material is the basis of the quality of the finished product, and we need to conduct a careful examination on the spot 。 See if you really have technical strength, experimental conditions and application experience In addition, from the putty to the base color of the paint, as well as the main paint color point and cover, it is better to use a company's products 2 Batch purchase: when the customer receives the larger upper left part, he / she needs to know the material plan Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Home of coatings: the water in water multi-color coating is a new type of coating product in the 21st century, which brings new development advantages to the construction and decoration industry However, the construction quality of the coating product needs to be very exquisite It is a relatively complex process We generally consider the following conditions: 1 Selection of raw materials: good materials are the basis of the quality of finished products, which should be carefully examined on the spot See if you really have technical strength, experimental conditions and application experience In addition, from the putty to the base color of the paint, as well as the main paint color point and cover, it is better to use a company's products 2 Batch purchase: when the customer receives the upper left part of the larger part, he / she needs to calculate the materials he / she knows As much as possible a purchase, especially the main color point The more batches are purchased, the more likely quality problems will occur Manufacturers are trying their best to solve the problem of batch color difference quality, but it is almost impossible The batch stability can only be minimized 3 Base material condition: our coating is generally made on the heat preservation and also directly on the ordinary wall, but not much During the construction of outer coating, the base material must be inspected carefully and strictly See if it can meet the construction requirements If it can not meet the construction requirements, it shall not be handled or repaired as soon as possible We can't get rid of such problems in the actual construction if the base material has quality problems 4 Weather conditions: there will be many weather reasons for the exterior wall coating, which will directly affect the quality of our project Such as temperature, wind, precipitation, etc 5 Construction management: the construction of exterior wall is a complex project In particular, the construction of multi-color paint is to be more careful For example, the spraying of color dots should avoid novice work as much as possible Prior to the construction, it is necessary to carry out the preliminary training to coordinate everyone's work The fewer the master painters, the better it is to have only one person to spray, but it's a bit unrealistic At least we need to call several masters together to unify the spraying effect With a good construction environment and a good construction team, our urban buildings will be more beautiful Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.