Coating knowledge: storage method of powder coating used in powder coating

Core tips: 1 Keep away from fire source and avoid direct sunlight, and keep in a well ventilated place with temperature below 35 ℃ 2 Avoid storage in places susceptible to contamination by water, organic solvents, oil and other materials 3 Powder coating shall not be exposed in the air at will after use, and the bag mouth shall be capped or screwed tightly at any time to avoid sundries mixing 4 Avoid long-term contact with the skin The powder attached to the skin should be washed with soapy water Do not use solvent The safety of the coating construction site 5 The equipment used in the coating operation shall be well grounded to eliminate static electricity 6 Avoid the phenomenon of no end discharge of the coating machine 7 In the powder spraying room, the concentration of floating dust shall be controlled as safe as possible Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Paint Home News: 1 Keep away from fire source and avoid direct sunlight Keep in a well ventilated place with temperature below 35 ℃ 2 Avoid storage in places susceptible to contamination by water, organic solvents, oil and other materials 3 Powder coating shall not be exposed in the air at will after use, and the bag mouth shall be capped or screwed tightly at any time to avoid sundries mixing 4 Avoid long-term contact with the skin The powder attached to the skin should be washed with soapy water Do not use solvent The safety of the coating construction site 5 The equipment used in the coating operation shall be well grounded to eliminate static electricity 6 Avoid the phenomenon of no end discharge of coating machine 7 In the powder spraying room, the concentration of floating dust shall be controlled below the safe concentration as far as possible to avoid the risk of dust ignition and explosion Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,