echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating material selection and seamless wall cloth construction method necessary knowledge for creating high quality wall effect

    Coating material selection and seamless wall cloth construction method necessary knowledge for creating high quality wall effect

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: seamless wall cloth is a kind of wall decoration material that appears in the decoration market in recent years The wall cloth is simple to paste, rich in patterns, strong in three-dimensional sense, excellent in decoration effect, and has the advantages of water-proof, dust-proof and oil proof The most important thing is that the price is affordable, so it is deeply loved and favored by the public So, what is the construction method of seamless wall cloth? Let's explain it one by one Wall requirements 1 Mix white cement and old powder in proportion to make putty to evenly paint the wall, so that the wall can meet the requirements of flatness and firmness 2 The wall surface shall be free of hollowing, blistering, cracking and color spots, and the corner line shall be vertical or horizontal 3 To the wall Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Home of paint news: seamless wall cloth is a kind of wall decoration material that appears in the decoration market in recent years The wall cloth is simple to paste, rich in patterns, strong in three-dimensional sense, excellent in decoration effect, and has the advantages of water-proof, dust-proof and oil proof The most important thing is that the price is affordable, so it is deeply loved and favored by the public So, what is the construction method of seamless wall cloth? Let's explain it one by one Wall requirements 1 Mix white cement and old powder in proportion to make putty to evenly paint the wall, so that the wall can meet the requirements of flatness and firmness 2 The wall surface shall be free of hollowing, blistering, cracking and color spots, and the corner line shall be vertical or horizontal 3 Brush a layer of base film on the wall, and the corner and edge of the wall should be in place Construction method 1 Measure the size of the wall, check whether the wall can meet the standard of wall covering, and whether the wall is loose and falling off 2 If the wall meets the standard, brush a layer of wallpaper glue on the wall 3 Two or more people hang the wall cloth to the top of the wall One person presses one side, from top to bottom, from left to right, and slowly spreads the wall cloth Until the whole wall is completely covered, gently press the wall cloth to make it adhere 4 When there is a door, window or switch position, you should use a knife to cut off the sheltered wall cloth When cutting, you must not hurry, and take your time to avoid damaging the wall cloth 5 The treatment of the corner must be delicate and beautiful 6 Use a large scraper to compact the whole wall cloth as tight as possible to avoid falling off 7 Apply a little more glass glue to the corner of the wall 8 Check whether the seamless wall cloth is laid flat again If there are bubbles and hollows, iron it with an iron The iron should not be dry ironing, but steam 9 Use a clean rag with a little water to wipe the excess glue off the corner 10 After the completion of construction, do a good job in sanitation and cleaning The above is the construction method of seamless wall cloth and the requirements that the wall surface should meet before construction I believe you should have a general understanding of how to lay the seamless wall cloth after reading Although seamless wall cloth is made of cloth, it is not easy to be damaged, but it is necessary to pay attention to the construction method during construction Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.