echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating process: correct painting process

    Coating process: correct painting process

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Key tip: painting step 1: preparation Before indoor painting, it is necessary to do a good job of preliminary preparation, which mainly includes paint preparation, cleaning and protection around the painting, protection of furniture and floor, etc Paste color separation paper at the joint of door, window, furniture and paint for protection Wood cabinet, partition board, etc for interior decoration shall be sealed with paper to avoid falling on wood cabinet and furniture when painting Painting step 2: color matching The area of the wall area needs to be calculated between the painting, and the amount of paint needed should be calculated according to the area of the wall, Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Paint Home News: the first step of paint painting: before indoor paint painting, preparatory work should be done well, which mainly includes paint preparation, cleaning and protection around the painting, protection of furniture and floor, etc Paste color separation paper at the joint of door, window, furniture and paint for protection Wood cabinet, partition board, etc for interior decoration shall be sealed with paper to avoid falling on wood cabinet and furniture when painting Painting step 2: color matching The area of the wall area needs to be calculated between the painting The amount of paint needed can be calculated according to the area of the wall The prepared calculation can greatly reduce the waste of the paint After that, the required paint ingredients should be evenly distributed At this time, it is necessary to allocate all the paints reasonably at one time, so as to avoid the paint painting due to the paint Uneven wall painting caused by uneven deployment Then the primer is applied The primer can prevent the wall from anti moisture, make the color of the top coat uniform, and prevent the water stains caused by wood acid Paint painting part 3: after the preparation of construction paint is completed, the next step is to carry out the construction Paint construction sequence: ceiling first , line, back wall and wall surface shall be painted at least twice 5% - 10% water can be added for the first coat to facilitate wall absorption No water can be added for the second coat There is a certain interval time between the second coat and the first coat When rolling painting, two kinds of roller brushes of thickness and fineness shall be used at the same time The thick roller brush shall be used first, and the fine roller brush shall be followed immediately The thick roller shall be used to evenly paint the wall and the fine roller shall be used Roller in the rough roller brush place, in the second brush again, so that the wall paint becomes more delicate (it seems that it's a little tedious, but in fact, it's quite simple to operate.) The fourth step of paint painting: polishing when the indoor paint painting is finished, what we need to do is to protect the smoothness of the wall, so the next work is the polishing of the wall When polishing, we need to feel the smoothness of the wall by hand, after all, we will know if it's good to try Then, sandpaper is used for polishing After the wall is polished, it needs to be cleaned thoroughly to ensure the wall is clean and tidy The fifth step of painting: after cleaning and polishing, cleaning and acceptance are completed When the construction workers in charge of home decoration clean up the wall, we will carry out the acceptance During the acceptance, we should pay attention to whether the wall is smooth and flat, whether the color and hue are what we want, and whether the wall is clean and tidy, and whether there is paint dripping in other areas except the wall Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.