echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating process: production process of color floor coating

    Coating process: production process of color floor coating

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Key tips: 1 Formula of color floor coating: This product is composed of color middle layer coating and cover 1 Color middle coating formula: Component dosage / kg white emulsion [solid content (50 ± 2)%] 20 ordinary portland cement (42.5R) 100 iron oxide pigment powder 10 quartz powder 50 sodium hexametaphosphate aqueous solution (3%) 20 tributyl phosphate small amount of water 2 Mask formula: Component dosage / part of petroleum wax 8, wax 3, mixed oil 12-18 II Production process 1 Preparation of color intermediate coating: (1) Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Paint Home News: 1 Color floor coating formula: This product is composed of color middle layer coating and cover 1 Formula of color middle layer coating: component dosage / kg white emulsion [solid content (50 ± 2)%] 20 ordinary portland cement (42.5R) 100 iron oxide pigment powder 10 quartz powder 50 sodium hexametaphosphate aqueous solution (concentration 3%) 20 tributyl phosphate small amount of water appropriate 2 Formula of finishing agent: component dosage / part petroleum wax 8 ground wax 3 mixed oil 12-18 2 Production process 1 Preparation of color middle layer coating: ① prepare sodium hexametaphosphate aqueous solution first Take 19.4kg water and put it into the bucket, add sodium hexametaphosphate, stir and dissolve completely Then add 10kg of iron oxide series pigments (red, yellow, blue, black optional), and mix evenly 2 Start stirring the mixer, add white latex 20kg in the mixing process, stir 15min or stop, add a small amount of phosphate three butyl ester to eliminate foam ③ The slurry is fed into the colloid and ground to about 70 μ m, filtered, discharged and loaded into the barrel to obtain the finished color slurry of intermediate base material ④ Cement and quartz powder are added at the construction site, the amount of which is shown in this formula Add the above two powders into the base material color paste, mix evenly, and construct in time according to the original design pattern color The coating thickness on the ground is about 1mm The paint is dried on the floor for 24h, polished with gauze, and decorated properly It can shine in about 36-48h 2 Preparation of mask agent: heat and dissolve it in the pot according to the formula (pay attention to fire prevention), add the mixed oil after ceasing fire, mix it well, and then discharge the material and seal the package This product is soft floor wax During construction, the commercial soft floor wax can be used instead After the middle coating layer is polished and leveled, wipe off the ground dust with a wet clean cloth, and then evenly apply the covering wax on the middle coating, and repeatedly wipe out the light Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.