Coating process: production process of water soluble air self drying surface enamel

The key points are as follows: 1 Formulation of water-soluble air dry surface enamel: formulation dosage / kg of water-based alkyd resin 283.4 ammonia water (28%), 17.4 smooth agent 2.0 glycol monobutyl ether 10.4 cobalt dry material 2.3 zirconium dry material 1.2 water 469.6 titanium dioxide 230.42 Production process of water-soluble air dry surface enamel: (1) Prepare raw materials according to the paint formula; (2) Add 189.3kg water diluted alkyd to the pull cylinder of the paint dispersion mixer, start the mixer (rotating speed: 300r / min), and slowly add the water-based alkyd tree in turn Shenyang steel structure fireproof coating construction expert punde Building Fire Engineering Co., Ltd Recommended introduction: since its establishment, Shenyang punde Construction Fire Engineering Co., Ltd has cultivated a group of professional construction teams with excellent equipment, rich experience and serious responsibility with advanced and scientific management methods and strict engineering quality assurance and after-sales service system It has undertaken a number of fire system installation projects, which has been praised by customers Every idea and special requirement of you will be fully considered by us and fully realized in the construction technology, which will become the cornerstone of our successful long-term development We are looking forward to your invitation, to provide you with quality services and high-quality technical support! All construction coatings have passed ISO9001 Home of coatings: 1 Formulation of water-soluble air dry surface enamel: formulation dosage / kg of water-based alkyd resin 283.4 ammonia water (28%) 17.4 smooth agent 2.0 glycol monobutyl ether 10.4 cobalt dry material 2.3 zirconium dry material 1.2 water 469.6 titanium dioxide 230.42 Production process of water-soluble air dry surface enamel: (1) prepare raw materials according to the formulation; (2) 189.3kg water diluted alkyd is added to the pull cylinder of the paint dispersion mixer, the mixer is started (rotating speed: 300r / min), and then the water alkyd resin, ammonia water, smoothing agent, glycol monobutyl ether, cobalt dry material, zirconium dry material and titanium dioxide are added slowly and evenly; (3) the mixer speed is increased to more than 1000r / min and stirred for 20-30min; (4) Reduce the speed, add the remaining water, adjust the viscosity to be qualified and mix evenly; (5) stop the machine, filter, discharge the material, load the barrel and put it into storage Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,