Coating requirements for epoxy floor coatings

China Paint Online News Information

surface performance
1, when the ambient temperature is 25 degrees C,
2-3 days after construction should reach the dry,
the construction of the coating hardness reached a
full curing of about 80%;
Knife marks, roller marks, large area interface at the base surface flat, epoxy floor coating leveling is good
5, the coating color is uniform, no floating hair flowers, floor coating coating large area interface does not allow a significant color difference;
6, except for airborne dust dropped on the surface of the floor coating caused by the very small defects, not allowed to have rough impurities,
7, meet the gloss requirements.
mechanical properties

1, epoxy floor coating coating hardness requirements ≤: no nail indentation or quick recovery;
3, medium strength, medium concentration of acid and alkali and common solvent scrubbing has no effect on epoxy flooring coating flooring,
4, wet mopeds dragged over or water flushed the surface of the floor unchanged color,
5, coating film without de-layering (bite bottom), drumming, dew bottom and other phenomena.
Tation
1, the overall molding effect and performance index of epoxy floor coating are closely related to the condition of the substing (such as the flatness, moisture content, strength, etc.) of the substation, and
2, the overall molding effect and performance index of epoxy floor coating are closely related to the construction site environment.