echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating standard: GB / T 13491-92 general rules for packaging of coating products

    Coating standard: GB / T 13491-92 general rules for packaging of coating products

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tips: 1 subject content and scope of application This standard specifies the basic requirements for packaging of coating products, including packaging classification, packaging technical requirements, storage, transportation, loading and unloading requirements, etc This standard is applicable to the packaging of coating products 2 reference standards GB 190 packaging mark of dangerous goods GB 191 Pictorial marking for packaging, storage and transportation GB 4122 general terms of packaging GB 4857.3 Basic test stacking test method for transport packages GB 4857.5 Basic test of transport package vertical impact drop test method GB 6544 Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Home of coatings: 1 subject content and scope of application this standard specifies the basic requirements for packaging of coating products, including packaging classification, packaging technical requirements, storage, transportation, loading and unloading requirements, etc This standard is applicable to the packaging of coating products 2 Reference standard GB 190 packaging mark of dangerous goods GB 191 pictorial mark of packaging, storage and transportation GB 4122 general terms of packaging GB 4857.3 Basic test method of transport packaging GB 4857.5 Basic test method of transport packaging vertical impact drop test method GB 6544 corrugated board GB 9750 packaging mark of coating products GB 13252 packaging empty container steel bucket 3 terms Packaging terms shall conform to the provisions of GB 4122 4 packaging classification 4.1 the packaging of coating products is divided into two levels, the first level belongs to the coating product packaging of dangerous goods, and the second level belongs to the coating product packaging of non dangerous goods 4.2 test items and quantitative value test items shall be stacked in level I and level II, M / 24h shall not be less than 3.53.5 drop, m shall not be less than 0.80.3 air tight, kPa shall not be less than 20 20 hydraulic pressure, kPa shall not be less than 100 4.3 requirements of different grades of products on packaging containers and packaging materials 4.3.1 steel barrel, tank (or external packaging) shall be used for the packaging of coating products of dangerous goods 4.3.2 steel drums, cans, plastic buckets, plastic bags (or external packaging) can be used for the packaging of non hazardous coating products 4.3.3 it is allowed to use equivalent packaging other than those specified in this standard, but it must meet the test requirements related to this standard 5 packaging technical requirements 5.1 product packaging preparation 5.1.1 packaging environment a the ground of the packaging site shall be flat, free of oil stains, clean and well ventilated b There should be corresponding personal safety protection measures, such as: masks, protective glasses, fire-fighting equipment, etc 5.1.2 the product coating products shall be inspected before being put into the container and shall conform to the relevant provisions of the product standard 5.1.3 forge ahead material 5.1.3-1 steel plate shall comply with relevant national standards 5.1.3-2 corrugated board shall comply with gb6544 5.1.3-3 the packaging materials shall not have any physical and chemical effects on the product quality 5.1.4 packing container 5.1.4-1 packing container type and capacity specification (see Appendix A) 5.1.4-2 there shall be no obvious rust on the surface of steel drum, and the sum of depression area shall not be greater than 2% of the total area 5.1.4.3 vessels with capacity of 4-24l shall be equipped with lifting beam or lifting ring, and its strength shall be three times of the capacity 5.2 product packaging mark 5.2.1 product sales packaging shall comply with the provisions of GB 9750 5.2.2 the product transportation package shall conform to 191 mark 3 (upward mark) 5.2.3 transport packaging of dangerous goods coating products shall conform to GB 190 mark 7 (flammable liquid mark) 6 package transportation 6.1 package transportation shall conform to the relevant provisions of transportation standards 6.2 the package shall be covered with awning to avoid direct sunlight and rain, and shall be well ventilated 6.3 the stacking height of packages during transportation shall not be higher than 3.5m 6.4 the package shall not be dropped, rolled or inverted during loading and unloading 7 Package storage 7.1 the package shall be stored in a well ventilated warehouse or an open-air place with awning and equipped with corresponding fire-fighting equipment 7.2 the packages can be stored separately or stacked in a proper way 8 Test method 8.1 stacking test shall conform to relevant provisions of GB 4857.3 8.2 the drop test shall comply with the relevant provisions of GB 4857.5 8.3 the air tight and hydraulic test shall comply with the provisions of 6.2 and 6.3 of GB 13252 9 Inspection rule 9.1 the manufacturer shall ensure that the packaging containers produced meet the requirements of this standard, and the inspection department shall inspect them according to this standard and issue a certificate of conformity 9.2 in case of any dispute between the user and the manufacturer on the weight of the packaging container, the user has the right to reinspect the accepted packaging container according to the provisions of this standard If the re inspection result does not meet the requirements of this standard, the user has the right to reject it Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.