echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating standard: quality inspection standard for waterproof coating

    Coating standard: quality inspection standard for waterproof coating

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    The main results are as follows: 1 Testing of flexibility at - 25 ℃ Apply wax on flat glass, apply one layer of prepared waterproof coating horizontally and straightly at an interval of 2 hours, with the film thickness of 1.0-1.5mm After 8 hours, remove it from the glass plate when it feels dry with fingernail Place it indoors for 7 days at (25 ℃± 2 ℃), then cut the strip with length of 20cm and width of 2cm, place it at - 25 ℃, put the sample in half an hour, and use pencil to turn it forward and backward If there is no crack or fracture, it is qualified for low temperature flexibility test   Paint knowledge | precautions for wall paint color selection Recommended introduction: when painting the wall, the owner sometimes has difficulty in choosing what color of the wall paint to paint In fact, there is no ugly color in the wall paint, only the disharmonious color matching The use of wall color contains the knowledge of health Too strong color will stimulate people's perception, make people have a sense of fidgety, affect people's mental health Grasp the basic principles of wall color and paint a colorful space 1、 Wall paint color selection notice 1 Light color is generally used for the top surface Light colors make people feel light, dark colors make people feel heavy Usually, the treatment of rooms is from top to bottom, from shallow to deep For example, the ceiling and walls of rooms are white and Paint Home News: 1 Flexibility test at - 25 ℃ low temperature: apply wax on flat glass, apply one layer of prepared waterproof paint horizontally and vertically, with an interval of 2 hours, coating The thickness is 1.0-1.5 mm After 8 hours, remove it from the glass plate when it feels dry with the nail Place it in the room for 7 days at the temperature of (25 ℃ ± 2 ℃), then cut the strip of 20 cm in length and 2 cm in width Place it at - 25 ℃, put the sample in the room for half an hour, and wind it with the pencil once in front and back respectively If there is no crack or fracture, it is qualified for the low-temperature flexibility test Two, the fracture elongation check: in the waterproof construction, the waterproofing material is stirred well, and is repeatedly painted on the waxed flat glass plate The film thickness is between 1 and 5 millimeters After placing it for 7 days, soak in about 1% of the alkaline water for 7 days, then adjust it to 50 C in the thermostat At 2 C for twenty-four hours, dumbbell tensile test is required The elongation is maintained at 80% (no treatment is 200%) If the standard is met, the elongation of the fracture is checked If unqualified, the amount of emulsion can be increased 3、 Adhesion inspection: high polymer waterproof mortar can directly form the "8" shaped formwork, and the formwork will be released 24 hours later Immerse in human water for 7 days, dry cure at 25 ℃± 2 ℃ for 28 days, and do bonding test Polymer waterproof mortar, ash: water: glue = 1:0.11:0.14, polymer waterproof mortar is 2.3mpa Mix the polymer waterproof coating to make paste, apply the mixed coating to two half "8" mortar blocks, and put them for 7 days to do the bonding experiment The ratio of polymer waterproof coating (high elastic), powder: glue = 1:1.4; (medium elastic), powder: glue = 1:0.8-1 The low molecular weight waterproof coating is 0.5MPa, and it is qualified if it is greater than or equal to the bonding index 4、 Water impermeability inspection: in the laboratory, the special instrument is used for testing The method is to prepare the coating in proportion and brush it on the waxed glass plate for several times The thickness of the coating is 1.5mm, which is kept for 7 days Then it is put in the oven at 50 ℃± 2 ℃ for 24 hours After taking it out, it is placed for 3 hours for water impermeability test The water impermeability is 0.3MPa If there is no leakage or wet printing for 30 minutes, the waterproof effect can also be inspected by visual inspection The method is to brush the coating on the non-woven fabric for 4-6 times After drying out (about 24 hours), the film thickness is 1.0-1.5mm, which is made into the shape of shoe box, and then add 1% alkali water into the box If there is no leakage after three days, it is qualified 5、 Water resistance inspection: the coating is applied on the cement block for many times, with a film thickness of 1.0-1.5mm, placed for 7 days, immersed in 1% alkali water for 7 days, without delamination, peeling and hollowing, it is qualified 6、 Film forming thickness inspection: puncture three points every 100 square meters with needle puncture method, measure its height with ruler, take its average value, film forming thickness should be greater than 1.5mm Mark the puncture for repair Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.