Coating technology: application and construction of low polyvinyl alcohol interior wall coating

Core tip: low polyvinyl alcohol interior wall coating is used for interior wall painting, especially for new wall painting It can be used for painting kitchen, toilet, balcony and general wall The wall surface shall be treated before applying the paint Carefully clean the dust and oil on the old wall If the coating of the old wall has been weathered and blistered, it should be removed For the new wall with ordinary cement mortar, after the wall humidity (the water content of the new wall is large) is less than 14%, the putty shall be applied, and before the putty is applied, the wall shall be spot patched, so that there is no obvious pit, big crack on the wall After the touch up layer is dry, the putty can be fully applied After the putty is dry, polish it with sandpaper and remove the powder Shenyang steel structure fireproof coating construction expert punde Building Fire Engineering Co., Ltd Recommended introduction: since its establishment, Shenyang punde Construction Fire Engineering Co., Ltd has cultivated a group of professional construction teams with excellent equipment, rich experience and serious responsibility with advanced and scientific management methods and strict engineering quality assurance and after-sales service system It has undertaken a number of fire system installation projects, which has been praised by customers Every idea and special requirement of you will be fully considered by us and fully realized in the construction technology, which will become the cornerstone of our successful long-term development We are looking forward to your invitation, to provide you with quality services and high-quality technical support! All construction coatings have passed ISO9001 Coating home news: low polyvinyl alcohol interior wall coating is used for interior wall painting, especially for new wall painting It can be used for painting kitchen, toilet, balcony and general wall The wall surface shall be treated before applying the paint Carefully clean the dust and oil on the old wall If the coating of the old wall has been weathered and blistered, it should be removed For the new wall with ordinary cement mortar, after the wall humidity (the water content of the new wall is large) is less than 14%, the putty shall be applied, and before the putty is applied, the wall shall be spot patched, so that there is no obvious pit, big crack on the wall After the touch up layer is dry, the putty can be fully scraped After the putty is dry, polish it with sandpaper, remove the powder, and then paint The second coat can be applied only after the first coat is dry Paint shall be applied within 3 days after sanding putty Otherwise, the putty will lose the adhesion with the wall when it is exposed to the air for a long time, which will cause the coating layer to rise The covering power of this product is slightly poor, and it can be brushed for 2-3 times The product should be stored in the environment of 10-35 ℃ for 1 month, and the coating should be stirred evenly when used Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,