echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating technology: construction scheme of fluorocarbon paint

    Coating technology: construction scheme of fluorocarbon paint

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Key tips: fluorocarbon primer spraying 1 Check whether the putty meets the requirements, and repair the problem in time; 2 Spray primer on the completely dry wall (the wall should be dry, and the spraying rate of the wall is less than 8%) (the air pressure is 5-8KG / cm2, no spraying) It is required that the spraying shall be uniform without omission, the primer spraying shall be uniform without any blooming, and the construction shall not be carried out in windy (above grade 6) and rainy days 4 The primer shall be sprayed once and inspected after spraying If there is a batch of scratch mark or bee eye on the wall, it must be polished to meet the requirements, 5 grinding shall be 280 mesh or 360 mesh Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Paint Home News: fluorocarbon primer spraying 1 check whether the putty meets the requirements, and repair the problems in time; 2 spray primer on the completely dry wall (the wall should be dry, and the spraying rate of the wall is less than 8%) (the air pressure is 5-8KG / cm2 No spraying) It is required that the spraying shall be uniform without omission, the primer spraying shall be uniform without any blooming, and the construction shall not be carried out in windy (above grade 6) and rainy days 4 The primer shall be sprayed once, and the inspection shall be carried out after spraying If there are batch scratch marks or bee holes on the wall surface, it must be polished to meet the requirements 5 280 mesh or 360 water abrasive paper shall be used for grinding, and the grinding shall be careful, and the coating film shall not be worn through 6 After grinding, the dust shall be removed, and the dust generated by grinding on the wall surface shall be cleaned with rags If the dust removal is not complete, the fluorocarbon paint will not be able to achieve a smooth coating after construction 7 after the primer is sprayed, the primer shall be sprayed evenly, with uniform luster, and the surface of the coating shall be smooth without dust and other stains The primer of fluorocarbon finish painting must be completely dry, and there shall be no dust and other sundries on the wall; 2 Construction ratio, main paint; curing agent, diluent = 10; 1; 2; 3 The blended fluorocarbon paint must be filtered by 200 mesh screen, and diluent shall be continuously stirred during the placing process to avoid sedimentation; 4 Spray gun model w-77, nozzle size; 1.5-2.0m; air pump pressure; 0.3-0.5n; 5 During the construction, the cooperation of spraying number, spraying area, spraying base surface and distribution of hanging cage shall be considered Considering the actual situation of the project, the construction personnel shall be arranged to spray at the same time Under the premise of ensuring no sagging, the spraying thickness shall be as much as possible; 6 Anti pollution and anti-virus work shall be done well, the downpipe shall be protected, and workers shall wear anti-virus masks, gloves and other protective articles during the construction, At the same time, fireworks are strictly prohibited; the spraying shall be uniform, with reasonable density, without sagging, uneven light and shade, blooming and other phenomena; the hand feel shall be fine, with uniform luster, without batch scratch marks and unevenness The performance characteristics of fluorocarbon paint (1) the excellent corrosion resistance benefits from good chemical inertness, acid, alkali, salt and other chemicals and various chemical solvents of the paint film, which provides a protective barrier for the base material The hard surface hardness of the paint film is high, Impact resistance, buckling resistance, good wear resistance, showing excellent physical and mechanical properties, (2) maintenance free, self-cleaning, fluorocarbon coating has very low surface performance, the surface dust can be self-cleaning through rainwater, excellent hydrophobicity, (the maximum water absorption is less than 5%) and oil repellent, small friction coefficient (0.15-0.17), no dust scaling, good antifouling, (3) strong adhesion, in copper, Stainless steel and other metals, polyester, polyurethane, vinyl ammonia and other plastics, cement, composite materials and other surfaces have excellent adhesion, which basically shows the characteristics suitable to attach to any material, high decorative in the 60 degree gloss meter, can achieve more than 80% of the high gloss, (4) super long weather resistant coating contains a large number of F-C bonds, which determines its super stability, non powdering, non fading, With a service life of up to 20 years, it has superior stable service performance than any other It has excellent construction two-component packaging, long storage period and convenient construction Our company specializes in producing fluorocarbon paint The fluorocarbon paint produced by our company has been inspected by the authoritative technical department and the quality of all kinds of fluorocarbon paint has passed the certification of quality reputation supervision and Management Association, All kinds of fluorocarbon paint have passed the safety certification of relevant departments Our company's main products are civil paint, industrial paint, wood furniture paint, building decoration paint, etc the paint house focuses on the news and paint of paint, diatom mud, paint paint, paint process, fire retardant paint, diatom mud, paint, paint process, decoration knowledge and decoration effect map of fire retardant paint,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.