echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating technology: Construction Technology of texture paint

    Coating technology: Construction Technology of texture paint

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: art texture paint color painting, from the texture treatment of oil painting, uses the rich texture changes of art paint to make the base of canvas, and uses very cheap materials such as latex paint for art creation, which can often produce shocking finishing effect on the wall Unfortunately, this kind of relatively advanced construction techniques, but not the majority of art coating construction personnel can master Construction requirements of art texture paint: 1 The moisture content of concrete or plastering base shall not be greater than 8% when applying solvent coating, 10% when applying water-based coating and 12% when applying wood base Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Paint Home News: art texture paint color painting, from the texture treatment of oil painting, using the rich texture changes of art paint, making the base of canvas, using very cheap materials such as latex paint for art creation, can often produce a shocking finishing effect on the wall Unfortunately, this kind of relatively advanced construction techniques, but not the majority of art coating construction personnel can master Construction requirements of art texture paint: 1 When the concrete or plastering base is applied with solvent based paint, the moisture content shall not be greater than 8%; when the water-based paint is applied, the moisture content shall not be greater than 10%; and the moisture content of the wood base shall not be greater than 12% 2 The ambient temperature of the construction site should be between 5-35 ℃, and attention should be paid to ventilation and dust prevention 1、 The treatment of the base course of the texture paint shall meet the following requirements: 1 The base course of the concrete and cement mortar plastering: the putty shall be fully applied, the sandpaper shall be polished, the surface shall be flat and smooth, and the line angle shall be straight 2 Base course of gypsum board: the board joint and nail hole shall be treated according to the design requirements, and then the putty and sandpaper shall be fully scraped and polished 3 Varnish wood base course: the surface shall be flat and smooth, the color shall be consistent, and the surface shall be free of defects such as pollution, cracks, defects, etc 4 Basic layer of ready mixed paint: the surface shall be flat and free from serious pollution 5 Metal base: the surface shall be derusted and antirust treated 2、 General methods for finishing of textured paint: 1 Roll coating method: apply the paint on the base course roughly by the movement of the wool roller dipped in the paint solution according to the way of W, and then roll up and down the base course tightly with the wool roller not dipped in the paint solution, left and right to make the paint solution evenly spread on the base course, and finally roll the wool roller dipped in the paint solution in a certain direction The internal corners and upper and lower openings should be leveled with brush brush 2 Spraying method: the pressure of spray gun should be controlled within the range of 0.4-0.8mpa During spraying, the spray gun shall be vertical to the wall, and the distance shall be about 500mm, with uniform and parallel movement The overlapping width of two lines should be controlled at 1 / 3 of the spraying width 3 Brush painting method: directly follow the order of first left then right, first up then down, first difficult then easy, first edge and then Texture paint construction technology as above, texture paint is a good choice for home decoration, it is not only a variety of styles, but also health and environmental protection, which is worth choosing Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.