Coating technology: diatom mud negative carving construction technology

Core tip: diatom mud engraving is to carve a pattern or text on the surface of the new generation of interior decoration materials -- diatom mud, which can beautify or decorate In other words, it is to carve the pattern or text into a concave shape The construction technology of diatom mud engraving is introduced below Construction tools: sprayer, scraper, small scraper, masking paper, protective film, sandpaper, etc Construction requirements for base course: 1 Base treatment and maintenance → 2 Apply putty and level the wall & rar Shenyang steel structure fireproof coating construction expert punde Building Fire Engineering Co., Ltd Recommended introduction: since its establishment, Shenyang punde Construction Fire Engineering Co., Ltd has cultivated a group of professional construction teams with excellent equipment, rich experience and serious responsibility with advanced and scientific management methods and strict engineering quality assurance and after-sales service system It has undertaken a number of fire system installation projects, which has been praised by customers Every idea and special requirement of you will be fully considered by us and fully realized in the construction technology, which will become the cornerstone of our successful long-term development We are looking forward to your invitation, to provide you with quality services and high-quality technical support! All construction coatings have passed ISO9001 Paint Home News: diatom mud engraving is to carve patterns or words on the surface of a new generation of interior decoration materials -- diatom mud, which can beautify or decorate In other words, it is to carve patterns or words into concave shape The construction technology of diatom mud engraving is introduced below Construction tools: sprayer, scraper, small scraper, masking paper, protective film, sandpaper, etc Construction requirements for base course: 1 Base course treatment and maintenance → 2 Apply putty to level the wall surface → 3 Apply sealing primer 1 Choose the color of the gap, which is the color of the first layer 2 What color do you need for each pattern? Apply all kinds of diatom mud for different patterns 3 When the first layer of "finger pressure does not stick to your hands", stick the beautiful pattern paper neatly If you want to make other curves, the modeling principle is the same 4 Apply a thick layer of diatom mud on the masking paper (this way, the masking paper can not be easily moved), and then gradually thin it 5 When the surface is "finger pressed and not sticky", perform the first finishing (the batch knife cuts and presses the surface along the texture direction), and tear off the masking paper after completion 6 When 90% is dry, the edge light and the whole light shall be collected Term explanation: light receiving: when the finger presses the non stick hand, use a spatula to cut and press the surface to make it more flat, firm and form a protective layer Reason: glue containing products can adhere to particles, not light up Due to the need for environmental protection, diatom mud does not contain glue, does not receive light or does not receive light well, so it will definitely lose powder, so it needs to receive light Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,