echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating technology: diatom mud texture production (Continued)

    Coating technology: diatom mud texture production (Continued)

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: the construction method of diatom mud wall texture can be divided into the following three series: flat light construction method, spray construction method and art construction method

    These three construction methods have the same construction requirements for the base course: 1

    Base course treatment and maintenance → 2

    Apply putty and other leveling walls → 3

    Apply sealing primer

    If water resistant putty is used in step 2, the sealing primer in step 3 can be omitted

    1、 Planimetry Pingguang construction method is mainly to adapt to the objective situation that the current home decoration customers are mainly white and smooth, and to meet the needs of those who have to choose healthy decoration elements Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively

    The feature of the breathing wall is obvious

    When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity

    It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively

    The feature of the wall that can breathe is obvious

    When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coating home news: diatom mud wall texture construction method is divided into the following three major series: flat light method, spray method and art method

    These three construction methods have the same construction requirements for the base course: 1

    Base course treatment and maintenance → 2

    Apply putty and other leveling walls → 3

    Apply sealing primer

    If water resistant putty is used in step 2, the sealing primer in step 3 can be omitted

    1、 Pingguang method is mainly to adapt to the objective situation that the current home decoration customers are mainly white and smooth, and to meet those decoration customers who want to choose healthy decoration materials and not give up the traditional Pingguang and white aesthetic orientation

    This is a challenge for the construction of diatom wall materials

    Because the existing flat light standard in the customer's mind is the standard of emulsion paint wall, diatom mud wall material and emulsion paint are totally different materials, diatom mud wall material has no self leveling, whether the coating is flat or not has a lot to do with the skill of the construction master

    When customers choose flat finish coating, they must make clear with customers the standard of delivery, which can be determined by coating a sample on site in advance

    Before construction, strictly check whether the putty layer meets the requirements; whether doors and windows, furniture, wood floor and other objects are well protected

    Staffing: one person with the same interface within 5 ㎡, two persons with 5 ㎡ - 15 ㎡, and more than three persons with 15 ㎡ or above

    For the first time, use a stainless steel trowel to apply the mixed materials thinly on the base surface

    The area should not be too large, just 80cm wide

    The second batch coating shall be carried out in the same direction to ensure that the base batch coating is even and flat without obvious batch knife marks and bubbles; the coating shall be about 1mm-1.2mm

    Check the overall coating for defects and repair in time

    After the coating surface receives 85-90% water (non stick and no obvious indentation), use 0.2-0.5mm thick stainless steel trowel in the same direction for the third batch coating

    The coating thickness is 0.8-1m

    Pay attention to the force of pushing the knife, do not use too much force, and do not press repeatedly

    In the process of batch coating, the light shall be bright, the wall surface to be batch coated shall be visible clearly, and the concave and convex traces shall be trimmed in time

    Acceptance criteria: home of coatings focuses on coatings, diatom mud, paint coating, coating process, news information and coating of fire retardant coating, diatom mud, paint coating, coating process, decoration knowledge and decoration effect map of fire retardant coating,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.
    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent Echemi's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.