Coating technology: furniture painting is the construction technology

Core tip: paint is the common name of paint Painting furniture is for beauty and protection The operation method of painting furniture is as follows: Polish Before the furniture is oiled, the dust and sundries on the surface shall be removed, and the furniture shall be completely polished once with No 0 or No 1 sandpaper If the surface is rough, it can be polished with 1.5 sandpaper first, and then finely ground If the surface is clean and smooth, only grind the local unsmooth parts Fill depression Fill the holes, cracks, gaps and irregularities caused by ring knots with putty Before the putty is dry, carefully draw the same Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Paint Home News: paint is the common name of paint Painting furniture is for beauty and protection The operation method of painting furniture is as follows: before polishing the furniture, remove the dust and sundries on the surface, and use No 0 or No 1 sandpaper to polish it once If the surface is rough, it can be polished with 1.5 sandpaper first, and then finely ground If the surface is clean and smooth, only grind the local unsmooth parts To fill in a depression, putty shall be used to fill in holes, cracks, gaps and irregularities caused by ring knots Before the putty is dry, it can be carefully painted with the same wood grain as the side to make it beautiful After the putty is dry, polish it with sandpaper If the furniture surface is generally plastered with a very thin layer of putty, after drying, it can be polished with fine sandpaper once, which can make the furniture more flat and smooth Mix talcum powder with water for coloring to congee shape, add color and mix well Coat the furniture with cotton yarn evenly After coating, the floating powder can be wiped off with shaving or dry cotton yarn Brush the paint along the direction of wood grain, first brush the convex and concave parts of small area, and then brush the large surface The force should be even and smooth Do not roll back and forth Take care not to leave any joint mark at the joint The ordinary paint is naturally dried at room temperature, the ready mixed paint is dried after 24 hours, and the magnetic paint can be dried after 12 hours After the first oil drying, use the used No 0 or No 1 old sandpaper to thoroughly Polish once If any tiny hole or crack is found, putty can still be used to fill it After drying, grind it flat, and then brush the oil for the second time After the second oil drying, brush the third oil It's OK to paint the furniture three times Pay attention to keep the place clean and prevent fire It is understood that the furniture with poor quality has been painted with a layer of poor paint, and the smell emitted is harmful to human body Therefore, it is suggested that when choosing furniture, consumers should choose the furniture with good quality, sanitation and cleanness, as well as the furniture with high security and firmness, especially those with children Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,