echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating technology: how to spray the water in water multicolor coating evenly

    Coating technology: how to spray the water in water multicolor coating evenly

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: due to its advantages and differences, the painted building products are simple, beautiful, elegant and luxurious, which are favored by everyone Construction process of water in water multicolor coating 1 batch of putty powder a Apply coarse grey putty powder with crack resistance b Apply gray fine putty powder with crack resistance c Apply fine putty powder without crack resistance (Note: at last, polish the putty powder to remove dust) 2 alkali resistance for spraying Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Home of coatings: due to its advantages and differences, the painted building products are simple, beautiful, elegant and luxurious, which are favored by everyone The construction process of the water in the water multicolor coating: 1 batch of putty powder a, 1 batch of gray coarse putty powder B, 1 batch of gray fine putty powder C, 1 batch of fine putty powder without anti crack (Note: at last, the putty powder must be polished to remove the dust) 2 batch of special alkali and salt resistant sealing primer 3 sub grid: transparent primer; sub grid: Black primer; Sub grid: first use transparent primer, after drying out, use black primer to trace lines, 4 paste masking paper, spray in the middle (middle layer modeling paint), 5 spray color points, 6 spray glossy finish Many people will also encounter such problems How can we spray water-in-water colorful paint evenly? Most of the water in water multicolor coating is sprayed by spray gun For operation, the coating distribution is uneven due to improper use of spray gun Let's see the solution together The smaller the gun distance is, the greater the spraying pressure will be, and the greater the impact of air pressure on the product will be, the uneven situation will appear in the water in water multi-color coating, resulting in the problem of too thick coating; the larger the gun distance is, the smaller the spraying pressure is, and the coating is easy to lose, so that the part of the coating is sprayed too little, and the coating cannot reach the specified thickness The spray fan is vertical to the coated surface When operating the spray gun by hand, the spraying width shall not be too large, otherwise the coating will be uneven The spray gun shall always run parallel to the surface to be coated, perpendicular to the spray fan, with unstable running speed, uneven coating thickness, too fast running speed, too thin coating, too slow running speed, too thick coating When using the spraying equipment, it is necessary to make sure that the strength is moderate and the distance is appropriate, so as to get the desired coating effect After the construction, some unfinished things need to be improved, such as the cleaning up of paint and AIDS, and the blocking and retention of residual paint after use, which are all problems that need attention Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.