Coating technology: the necessary steps to supervise the coating construction site

Key tips: early stage of construction - mobilization of decoration materials At the beginning of decoration construction, it is necessary to communicate with construction workers in a timely manner to know whether their own decoration works are outsourced Once it is found that the works are outsourced, it is necessary to consult with the decoration company immediately to avoid the "outsourcing" of the works Secondly, it is necessary to check whether the on-site construction tools and materials are placed in accordance with the requirements of the contract, whether the fire-proof and moisture-proof equipment are complete, and whether the on-site management of workers is standardized About a week after the commencement of construction, materials required for construction will be mobilized successively Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Home of paint news: in the early stage of construction - when the decoration materials enter the site and the decoration construction starts, the construction workers shall be communicated in time to know whether the decoration project of their own is outsourced Once it is found that the project is outsourced, the decoration company shall be consulted immediately to avoid the "outsourcing" of the project Secondly, it is necessary to check whether the on-site construction tools and materials are placed in accordance with the requirements of the contract, whether the fire-proof and moisture-proof equipment are complete, and whether the on-site management of workers is standardized About a week after the commencement of construction, the materials required for construction will be mobilized one after another, which is the most critical link in the initial inspection of the site After the mobilization of decoration materials, the foreman, designer and owner are generally required to jointly carry out the acceptance During the acceptance, attention shall be paid to whether the materials mobilized are the brand materials of the decoration company, whether they are the brands specified in the contract, and whether the model, style and color of the materials are In accordance with the provisions of the contract, if special environmental protection materials are involved, the decoration company shall also be required to show the environmental protection test certificate After the decoration materials enter the site smoothly, in the future construction process, the foreman should also pay attention to whether he has the behavior of stealing beams and changing columns, or take the materials provided by the company with his own hands, and then use the other purchased materials to fill the vacancy Once there is a problem, the maintenance and after-sales service will be involved In the early stage of construction - after the construction of concealed works, the water and electricity engineering enters into the early stage of construction, the most critical link in the early stage of construction is the hydropower transformation, which is commonly referred to as concealed works The quality of concealed works determines the quality of the whole decoration to a large extent, so when the workers carry out the water and electricity transformation, the owners should pay more attention to the details In the process of circuit transformation, first of all, it is necessary to pay attention to whether the worker slotted horizontally and vertically, whether the wire surface is clean, especially whether the wire quality meets the national standard, whether the wire is fixed according to the specified interval when laying, and whether the PVC connector of the wire is firm and stable In the reconstruction of waterways, special attention should be paid to the material of water pipes, especially whether the joints of water pipes are of the same brand In the process of waterway reconstruction, the sewer must be prevented from blocking Before construction, the lower outlet and floor drain must be closed to prevent cement and mortar from entering the sewer If wooden keel ceiling is required indoors, it is necessary to check whether the workers are evenly painted with fireproof paint, whether the frame connection of keel is firm and whether the density interval of suspender meets the process requirements Middle stage of construction - the middle stage of wall ground and wood construction involves wall treatment, wall brick, floor brick and wood construction If the wall surface treatment needs to be puttied again or anti cracking treatment, it shall be carried out in strict accordance with the process specified in the contract, and the number of times of applying primer and finish paint shall also conform to the contract When laying the wall tiles, it should be noted that the soaking time of the wall tiles should be at least 2 hours When workers lay the wall tiles, they should pay attention to whether the flatness of the wall tiles meets the predetermined requirements In order to avoid the wall brick laying skew, the workers can be required to pull wire before laying If the interior wood construction involves the installation of veneer, it should be noted whether there is chamfering joint in the splicing of ultra long veneer and whether the splicing of ultra long dumb mouth is reinforced After the completion of the medium-term project, most of the decoration works have been basically completed, and the decoration effect has gradually revealed its true appearance, especially for large-scale projects such as TV background wall and on-site customized wardrobe, it is necessary to check whether the design and drawings meet the design requirements Later stage of construction - there are not many large projects in the later stage of construction to check the overall design drawings The floor is paved by professional floor pavers, and the floor must be cleaned before paving When the construction is near the end, it is critical to check whether the overall construction effect is consistent with the design drawings Check whether the woodworking items are broken, and whether the surface is flat or bulging Whether the bedroom door and other internal doors are opened normally When closing, the upper, left and right door seams of the room door shall be tight, and the lower door seams shall be moderate, generally 0.5cm is preferred When checking the wall surface, pay attention to whether there are uneven, bulging and other phenomena For the laying of wall and floor tiles, first check whether the gap is neat, then check the verticality and flatness of the wall tiles with a guiding rule, then check whether the tiling of the internal and external corners is square, and then check whether the pointing agent of the floor tiles is solid and full Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,