Common faults and treatment methods of star discharger
-
Last Update: 2018-02-02
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
There are some common problems occasionally encountered in the use of the star discharger, such as the sudden jamming of discharger during the unloading process At this time, it is necessary to cut off the power supply in time to check the cause The following company will list the common small faults and handling methods in use for your reference so as to deal with them in time: common faults of the star discharger 1 In case of air leakage and ash leakage at the shaft position of the end covers at both ends during use, the gland can be tightened or the sealing gasket can be replaced 2 If the material is stuck suddenly in use, please cut off the power immediately to check whether the material is too hard to pass smoothly or for other reasons If the hard material is stuck, then empty the hard material First, use the manual disc rotating wheel to start ? precautions for use of star discharger 1 Regularly check the lubricating oil level in the reducer and change the oil once every three months 2 Before starting the machine, make sure that there is no material inside, and it should run without load to avoid damaging the motor and reducer 3 Before starting the chain, check the tightness of the chain and adjust the tightness However, you need to deal with it according to the actual situation on the site.
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.