Common knowledge of coating: how to do a good job of local protection for secondary decoration in the downturn of the real estate market

Core tip: for many secondary decoration or partial decoration families, some building materials need to be removed during the decoration process, and the surrounding areas need to be protected to prevent damage Some materials that can be reused need to be protected to avoid unnecessary waste "Protective decoration" shall be carried out in the construction process, and a "safety helmet" shall be put on for the reusable project Secondary decoration and local decoration must be finished product protection Hu Zengguang, engineering director of Yezhifeng decoration Beijing Branch, said protective decoration mainly Paint knowledge | precautions for wall paint color selection Recommended introduction: when painting the wall, the owner sometimes has difficulty in choosing what color of the wall paint to paint In fact, there is no ugly color in the wall paint, only the disharmonious color matching The use of wall color contains the knowledge of health Too strong color will stimulate people's perception, make people have a sense of fidgety, affect people's mental health Grasp the basic principles of wall color and paint a colorful space 1、 Wall paint color selection notice 1 Light color is generally used for the top surface Light colors make people feel light, dark colors make people feel heavy Usually, the treatment of rooms is from top to bottom, from shallow to deep For example, the ceiling and walls of rooms are white and Paint Home News: for many secondary decoration or partial decoration families, part of the building materials need to be removed during the decoration process, and the surrounding areas need to be protected to prevent damage Some materials that can be reused need to be protected to avoid unnecessary waste "Protective decoration" shall be carried out in the construction process, and a "safety helmet" shall be put on for the reusable project Secondary decoration and local decoration must be finished product protection Hu Zengguang, engineering director of Yezhifeng decoration Beijing Branch, said that protective decoration is mainly important for the following types of decoration: the first type is when consumers are not satisfied with the refined decoration of the house and want to change parts For example, it is necessary to change the wall tiles, wall color, local doors and windows, etc in this case, it is necessary to protect the parts other than the demolished ones The second type is the house that has lived for two or three years The wooden doors and cabinets are very good If you only want to change the wall surface and change a sanitary ware, it also involves finished product protection The third type is that when the overall decoration of the old house is carried out, there are some places in the home that need not be removed and eliminated, but can still be reused, such as radiators, air conditioners, local floor tiles, etc., which also need to be protected locally How to carry out protective decoration? Experts suggest that valuables that can be moved, such as household appliances and high-end furniture, should be evacuated from the construction site as much as possible and moved to a safer place If only partial decoration is carried out, the non decoration part shall be covered with professional protective film for protection The protective film is provided by professional decoration companies with different thickness and texture It is recommended to combine soft protection with hard protection For example, when the toilet is partially decorated, the sofa in the living room should be surrounded with soft cloth and covered with protective film; the composite floor that needs to be protected needs to be covered with protective film, while the more expensive solid wood floor should be covered with protective film and then covered with a layer of hard gypsum board or cement pressure board ■ protect some furniture, protect soft cloth and cover with protective film If the floor is to be laid again, remove all furniture from the construction site Furniture placed in construction space shall be covered with professional protective film For high-end furniture, consumers can first use soft cloth, plastic film and other materials to deal with themselves, and then cover professional protective film to achieve double protection The radiator protection is handled by professionals with long service life and high probability of reuse Therefore, the decoration can be disassembled first, and then hung again after the completion of construction It should be noted that the removal and installation of radiators must be done by professionals to avoid collision caused by construction tools The pipeline protection which is far away from the line and buried in the wall or under the ground is a concealed project, so it is difficult to protect Therefore, it should be carried out according to the original construction drawings If there is no construction drawing, it should be far away from the expected line when chiseling the wall and drilling For example, when laying solid wood floor and keel, attention should be paid to avoid damaging the underground pipeline by bolts and steel nails; when removing or installing sanitary wares, attention should also be paid not to damage the original waterway After the protection of lamps and lanterns, do not turn on the lights for secondary decoration Many lamps and lanterns, especially the chandeliers, do not need to be eliminated Once most high-grade lamps are hung dirty, it is difficult to clean them At this time, the protective film should also be covered on the lamps and lanterns Remind consumers that after the lamp is covered with a protective film, they should avoid turning on the lamp for a long time, otherwise the accumulated heat may cause safety accidents In addition, the switch panel on the wall and the electronic communication equipment at the entrance door shall also be protected The protection of walls, doors and windows to avoid bumping the tiles and coatings on the walls does not need special protection In the case of not removing, it is only necessary to avoid bumping during construction It's easy to wipe the mud on the wall brick, and the dust on the wall coating can also be brushed off Doors and windows in the construction site need to be covered with protective film together with window frames, door jambs, etc to avoid damage ■ the removal reminds the wall brick removal to avoid damaging the line When removing the wall brick, the large impact drill or sledgehammer and other tools shall not be used Before demolition, it is necessary to make clear the pipeline laying in the original wall and whether the wall is a load-bearing wall, etc., so as to avoid damaging the concealed lines or the wall next to the light wall when dismantling the bricks In addition, the difficulty of removing wall tiles is not the same Some loose tiles can be removed only by moving them, while some tiles are very firm It is recommended to use a small flat drill The removal process of composite wood floor from the corner is relatively simple Use a flat screwdriver to pry off the skirting line, and then pry off and remove the floor at the corner along the edge of the skirting line This floor may be damaged, but other floors can be completely removed The composite wood floor with lock structure shall be pulled out according to the long side of the floor When removing the solid wood floor, the skirting line shall be removed first, and then the skirting line shall be removed from the corner of the wall, and the wood floor shall be lifted and drawn out by using the nail hammer Because the solid wood floor is installed on the wooden keel, it will have certain elasticity when it is lifted, and the construction is difficult, but the cutter cannot be used, because the cutter is easy to damage the ground and the expansion bolt fixing the wooden keel, which will produce sparks More and more design schemes of wall demolition from top to bottom involve wall demolition Although consumers understand that load-bearing wall cannot be demolished, they still doubt the demolition method of non load-bearing wall Experts explained that most of the non load-bearing walls are made of light bricks, while the old houses before the 1980s were basically made of red brick In the demolition, it must be demolished from top to bottom, one layer at a time, one piece at a time Avoid hitting with a sledgehammer to prevent injury to human body and stair floor When it comes to the wall of buried lines, the route shall be determined first to avoid damaging the reusable pipes Remove the connecting parts before removing the cabinet and sanitary ware When removing the cabinet, remove the connecting parts between the cabinet and the wall, such as screws and bayonets Then the cabinet can be removed as it is After the water is cut off and the power is cut off, remove the stove sink, etc., and the table top is also easy to remove In addition to removing the connecting parts of the sanitary ware, the sealant between the sanitary ware and the wall or the ground shall be removed with a file to facilitate the removal of the original sanitary ware ■ tips: protective decoration with "protection fee" should be planned before construction, and the space and items to be protected should be determined according to the contents to be removed In general, home decoration companies should charge a certain fee for the protection of finished products The charging method is based on the number of square meters or the number of protected objects Consumers should consult in detail and make a budget before decoration Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,