Common knowledge of coating: three basic technologies that can not be saved in wall renovation

Key tip: apply glue to the bottom In order to save money or cost, the guerrillas and irregular small companies in the road may directly apply putty to the wall after repairing the basic level In fact, there is also an indispensable link in the middle - rolling glue After the base course is repaired, the wall surface shall be rolled with glue first, and the putty shall be applied after the glue is completely dry, so as to ensure the close adhesion of the new coating and the original base course, and avoid the problems such as peeling and cracking of the wall surface after painting Glue with the common 801 construction glue Key crack repair Wall cracks according to different causes Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Paint Home News: in order to save money or cost, the guerrillas and irregular small companies may directly apply putty to the wall after repairing the base In fact, there is also an indispensable link in the middle - rolling glue After the base course is repaired, the wall surface shall be rolled with glue first, and the putty shall be applied after the glue is completely dry, so as to ensure the close adhesion of the new coating and the original base course, and avoid the problems such as peeling and cracking of the wall surface after painting Glue with the common 801 construction glue According to different causes of formation, cracks on the wall are divided into several types The slight cracks can be directly filled with putty powder and glue, but when encountering serious wall cracks, they should be treated differently Due to the original wall settlement, improper treatment of the base course and other reasons, some of the walls will have some serious cracks In the renovation process, it is necessary to shovel off the coating, use the crack sealing paper tape to repair, and then roll the glue, scrape the putty, apply the primer and finish paint The walls around the doors and windows are easy to get moldy because they are often drenched by rain There are also hidden corners such as corners, sofas, air conditioners, etc., which will become moldy and discolored after a long time When renovating, we should not only solve the old problems, but also take preventive measures to avoid new problems For the moldy and discolored walls, the coating must be removed during the renovation, and the waterproof and mildew proof treatment shall be done first, and then the construction procedure shall be completed according to the normal steps In addition to making a separate waterproof layer, the paint and coating used in each construction link should also be waterproof, especially the primer Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,