Common knowledge of paint: what are the key points of quality control of decorative paint Engineering

Core tips: 1 The materials used for painting must meet the design requirements, and the product quality shall meet the requirements of relevant standards 2 Before painting, appropriate viscosity of paint shall be selected according to process characteristics and temperature conditions to prevent sagging and brushing 3 Before painting, check the moisture content and surface treatment of the base course, and clean the dust, dirt, burr, gap and unevenness of the surface 4 In the process of painting, the film of each painting should not be too thick, which should be controlled at 50-70 μ m generally Shenyang steel structure fireproof coating construction expert punde Building Fire Engineering Co., Ltd Recommended introduction: since its establishment, Shenyang punde Construction Fire Engineering Co., Ltd has cultivated a group of professional construction teams with excellent equipment, rich experience and serious responsibility with advanced and scientific management methods and strict engineering quality assurance and after-sales service system It has undertaken a number of fire system installation projects, which has been praised by customers Every idea and special requirement of you will be fully considered by us and fully realized in the construction technology, which will become the cornerstone of our successful long-term development We are looking forward to your invitation, to provide you with quality services and high-quality technical support! All construction coatings have passed ISO9001 Paint Home News: 1 The materials used for paint must meet the design requirements, and the product quality shall meet the requirements of relevant standards 2 Before painting, appropriate viscosity of paint shall be selected according to process characteristics and temperature conditions to prevent sagging and brushing 3 Before painting, check the moisture content and surface treatment of the base course, and clean the dust, dirt, burr, gap and unevenness of the surface 4 In the process of painting, the film of each painting should not be too thick, which should be controlled at 50-70 μ m generally 5 After the completion of the paint, the inspection and acceptance shall be carried out in time, the problems found shall be handled in time, and the finished product protection work shall be done well Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,