echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Common maintenance and overhaul methods for walk-in high and low temperature test chamber refrigeration compressors

    Common maintenance and overhaul methods for walk-in high and low temperature test chamber refrigeration compressors

    • Last Update: 2022-09-07
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    As a key component of the walk-in high and low temperature test chamber, the refrigeration compressor unit plays an indispensable key role
    in all the normal operation of the walk-in high and low temperature test chamber.

    Therefore, the common maintenance and repair of the refrigeration compressor in the environmental test chamber looks very critical, the following we will comb the refrigeration compressor related to the environmental test chamber, the common maintenance and maintenance and its repair methods are given: 1, carefully check the posture of each cylinder and fitness sports parts According to the "listening" to identify whether its working condition is all normal, if you find an abnormal sound immediately shut down for inspection; 2.
    Pay attention to the marked values of the barometer and grease pressure gauge on each barometer, air compressor gas storage tank and cooling tower, whether it is within the required range; 3.
    Check whether the temperature and total flow of the cooling circulating water are normal; 4.
    Check the grease supply status of the walk-in high and low temperature test chamber, and the interruption of the oil supply system of the intake system of the moving tissue is likely to lead to the occurrence of accidents (some refrigeration compressors are equipped with plexiglass plate baffles on the side of the cross head slide rail of the box, which can immediately see the cross head movement and the supply status of the grease); Cylinders and fillers can be inspected with unilateral cutting as a little oil, and can check the oil dripping status of the fuel pump into the cylinder; 5.
    Check whether the oil surface of the tank oil tank and the grease in the fuel pump are less than the ruler line and should be filled immediately when it is low (the oil gauge must be parked for inspection); 6.
    Feel the hand to check whether the temperature at the crankcase cross-line slide rail, suction and exhaust pipe cutting cover, etc.
    is normal
    .

    The content of the description is to say that the relevant walk-in high and low temperature test chamber refrigeration compressor, usually involved in the maintenance and maintenance and its repair method part of the relevant content, for the filling of the event we will do our best to solve
    for everyone.

     
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.