echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Common troubles of the washing machine and the way of self removal

    Common troubles of the washing machine and the way of self removal

    • Last Update: 2019-06-04
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    When the electric washing machine is in use, there will inevitably be some small faults If these faults are handled by manufacturers or distributors, it will take a long time, which inevitably delays the normal work process In fact, a lot of small failures of the washing machine are all faults that can be eliminated by the user Today, Xiaobei will give you a summary of the common washing machine faults and self troubleshooting methods 1 The floor washing machine is uneven We can check whether the pressure of the brush disc is not enough If so, adjust the brush disc to the appropriate pressure If not, the problem is that the brush disc and the cleaning pad are excessively worn and need to be replaced with a new brush disc or cleaning pad 2 The battery will run out of power if it is used for too short a time In this case, the battery charger or battery should be checked for failure If you use a non maintenance free battery, you need to check that the electrolyte is not enough, and if so, add distilled water In addition, the electrode and wiring terminal may be oxidized or covered with dirt In this case, only the oxide and dirt need to be removed Another possible situation is that the cleaning area is too large and the battery is overloaded In this case, the battery with larger capacity needs to be replaced 3 The machine cannot operate First, check whether the power supply is connected properly, or whether it is not charged in time after use, and the machine cannot run due to insufficient power IV if the water absorption motor of the washing machine does not work This is a complex situation, which needs to consider many reasons 1 Make sure your water pump switch is on and the power supply of water pump motor is connected normally 2 Check whether the motor fuse is burnt out If the fuse is burnt out, just replace the fuse 3 the water in the sewage tank is full It can be used normally after the sewage tank is emptied Chongqing beinate Cleaning Equipment Co., Ltd has been committed to providing you with satisfactory cleaning equipment solutions Focus on sales, leasing, maintenance of a variety of hand push washing machine, driving washing machine, automatic washing machine, battery washing machine, washing car, sweeper, driving sweeper, vacuum cleaner, high-pressure cleaning machine, electric cleaning vehicle and other cleaning equipment.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.