Correct installation and usage of plastic diaphragm valve

When the product is installed and used, pay attention to its safety precautions, which can reduce the chance of product damage and extend the service life of the product The plastic diaphragm valve is only a small part of the fluid transmission system, but it is very important for the transmission system because it can control the flow and speed of the fluid to meet the needs of people But it also needs to pay attention to the installation matters, otherwise it will affect the working efficiency of people's use process Which items should users pay attention to when installing? When people install the plastic diaphragm valve correctly, the purpose is to connect the two parts The connection between the plastic diaphragm valve and the feel is also through screws However, when connecting the two parts of the plastic diaphragm valve with the flange, it is necessary to use even force to tighten the screws, which is the safe and correct way If the screws are tightened with the same force as other valves during installation, the plastic diaphragm valve may cause flange deformation, that is, when water flows through this part, there will be water leakage The correct use of the plastic diaphragm valve can avoid damage to the valve When the user is using the plastic diaphragm valve, the clockwise direction is closed and the counterclockwise direction is open At the same time, if the door valve can not be moved, the user must not use force to turn the handle The handle may be damaged and the door valve can not be used normally Check the problem clearly and then solve it according to the problem You can also directly replace the new valve to remove the old valve In this way, the inspection is simpler and more detailed, so that your troubleshooting valve has problems, you can continue to use it, or you can extend the use time.