Correct maintenance of the price common faults of the automatic labeling machine

Correct maintenance of the price common faults of the automatic labeling machine With the continuous expansion of the price market of the full-automatic labeling machine, the full-automatic labeling machine has also played an important role We all hope that the price of the full-automatic labeling machine we use has a quality and a long service life If we correctly handle the common faults at ordinary times, the service life of our full-automatic labeling machine will naturally extend for a long time Therefore, In the process of using the automatic labeling machine, it is very important to maintain the common faults correctly 1 Try to avoid or eliminate the influence of the price of the automatic labeling machine on the static electricity of labeling In the process of labeling, it is easy to generate static electricity, which will have more or less impact on the labeling effect When appropriate, increasing the humidity of the labeling site will improve to some extent The use of ion fans is also a very effective solution There is automatic humidity control inside the labeling machine, which can control the cleanliness of the equipment, keep the labeling away from dust, and improve the labeling quality of products In this way, there will be no sign lifting phenomenon in the process of labeling, which will also make the price of automatic labeling machine reach the visual effect 2 Increase the viscosity of the price label of the full-automatic labeling machine, and try to make the label stick firmly To achieve this effect, it is necessary to consider improving the surface quality of the pasted hose Most of the products have a lot of varnish on the surface, which will increase the difficulty of labeling, easily make the contents ooze out, the micropores on the pipe wall and so on will cause the labels to rise The next important problem we should consider is how to avoid or reduce the occurrence of such problems; how to control the labeling pressure during the price labeling process of the full-automatic labeling machine; how to control the labeling Temperature during calibration Increasing the labeling temperature will not only improve the price labeling effect of the full-automatic labeling machine, but also increase the activity of substances inside the object with the increase of temperature, so that the label is more easily integrated with the tube body 3 There shall be no gap between the rubber scraper and the rubber roller in the whole length of the full-automatic labeling machine If there is a gap, the gap between the rubber scraper can be adjusted by adjusting the eccentric bolt The standard plate and the cot are only in contact without any pressure If the gap is too large and the glue on the standard plate is too much, it will cause glue rejection If the gap is too small and the contact between the standard plate and the rubber roller is too tight, the glue will be squeezed away and there is no glue on the half of the standard plate A lot of experiments show that Zui is better when the gap between the standard plate and the cot is between 0.1mm and 0.2mm The clearance can be larger than small by adjusting the bearing seat at the lower part of the cot if necessary, the bearing at the upper part of the cot shall be adjusted.