Daily maintenance of water-cooled electromagnetic induction aluminum foil sealer

The sealing machine is mainly to seal the packaging container to ensure that the product can be sealed and preserved to avoid product loss
.
The electromagnetic induction aluminum foil sealing machine introduced today is a machine that bonds aluminum foil sheets and plastic bottle mouths together, using electromagnetic induction to achieve contactless, continuous sealing operations, and the following will introduce what problems
should be paid attention to during maintenance in daily life.
1.
Pay attention to high temperature Due to the need of production speed, the power of the sealing machine is constantly improving, and at the same time, corresponding requirements
are put forward for the heat dissipation of the machine itself.
Experiments show that in the absence of water cooling cooling, the induction coil rises rapidly from 7 °C to about 400 °C in 5 seconds, and the surface of the coil oxidizes and turns black
.
In the case of air cooling, it is continuously maintained at about 100-200 °C, and the bottom plate of the sensor is baked black and crispy
.
In high temperatures, machines place high demands on the power grid and air humidity, which can cause fires or downtime
if you are not careful.
The water cooler solves this problem well, the water stored in the water tank is transmitted to the condenser through pumping, and then enters the corresponding heating element of the machine, the component is cooled, and the condenser will eliminate the excess temperature through the fan, which greatly reduces the heat caused by the self-consumption of the machine and realizes the smooth operation
of the machine.
2.
Be sure to inject a sufficient amount of circulating cooling water into the machine before use The water-cooled electromagnetic induction aluminum foil sealer must inject a sufficient amount of circulating cooling water
into the machine before use.
After the machine starts, pay attention to the smooth water circulation, which is directly related to the heat dissipation
of the machine.
3.
Have a clean environment Daily maintenance should pay attention to the use of aluminum foil sealing machine environment, pharmaceutical industry workshop is relatively clean, can be ordinary wiping, plug interface inspection, for the pesticide industry and chemical industry, the production environment is relatively bad, dust, corrosive liquid to the machine caused a lot of damage, so to clean the machine frequently, if necessary, use the air compressor with 1.
7kg pressure to clean
the dust 。 4.
Replace the antifreeze in time In winter, it is also necessary to replace the antifreeze in time, when replacing the antifreeze, first put the water in the machine water tank clean, and then inject the antifreeze, let the machine run without load for 3 minutes, and wait until the outlet has enough liquid pressure before shutting down
.
In short, if you usually pay attention to maintenance, the life of the sealing machine will be extended, and it can be normal and stable during operation, and it is not easy to fail
.