-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Paint Online News Information:
(1) Varnish construction process:
Clean wood surface →scrub paper polishing→ moisturizing powder → sanding sandpaper→ scraping the first time putty, sandpaper polishing→ scraping the second time putty, fine sand paper Polishing→ Brushing oil color→ brushing first varnish→ spelling color, patching putty, fine sand paper polishing→ brushing the second varnish, fine sand paper polishing→ brushing the third varnish, polishing→ water sanding paper polishing, waxing, polishing.the construction specification of oil brushing:
sanding the grass is an important process of painting varnish, the wood surface should first of all remove dust, oil and other impurities.
oil powder is also an important process of varnish painting, construction with cotton wire oil powder applied to the surface of the wood, rub back and forth with your hands, the oil powder into the wood eye.
the oil brush, the hand oil brush should be easy and natural, fingers gently force, to move without loose, do not drop the brush.
Brushing should be in accordance with the secondary more, each time less oil, operation time, the requirements of the brush, in accordance with the first up and down, first difficult then easy, first left and then right, first inside and then outside the order and horizontal brush vertical operation method construction.
(2) mixed paint construction process:
first clean the grass surface dust, repair the grass →smearing with matte paper→ sections of scarring paint slices →dispashing putty→ applying dry oil→ the first time full of scraping putty→ Polishing→ Brushing the underlying paint→ The underlying coating is dry and hard→ The brushing surface layer →reflowing putty for repair→ polishing wipes the third finish paint brushing the second coating →sweeding→ the third finish → polishing waxing.the construction specification of wood surface mixed oil:
grass-roots treatment, in addition to cleaning up the grass-roots debris, should also be local putty embedding, sandpaper should be polished along the wood grain.
the paint sheet (worm glue) to seal the scar with a large color difference and wood fat before painting the surface layer. Should be applied to the grass dry oil or clear berthing, brush dry oil layer to all parts evenly brushed through, can not leak brush.
the bottom oil dried through, full scrape the first time putty, dry after hand sandpaper polishing, and then make up high-strength putty, putty to pick the wire does not fall. When applying surface paint, polish it with fine sandpaper first.
(3) Note:
to clean up the surrounding environment, prevent dust from soaring and reduce the quality of paint.
paint have a certain toxicity, the respiratory tract has a strong stimulating effect, the construction must pay attention to do a good job of ventilation.
must be constructed within the indoor temperature range required by the product. Different products have different temperature requirements, which can be found in product packaging or instructions. Avoid forced construction in high humidity or cold conditions.
each operation to ensure that the dry side performs a second operation.
use paint with the same substitin, do not mix different types of paint (e.g. nitro paint and alicyl paint can not be mixed) to avoid adverse reactions.