Diatom mud purchase: what is water-based diatom mud? Introduction to the use of water-based diatom mud

Core tip: a lot of diatom mud products on the market are dry powder diatom mud Previously, I introduced the advantages of dry powder diatom mud to you Today, Xiaobian introduces another kind of diatom mud - Water-based diatom mud Let's have a look! What is water-based diatom mud? Introduction to the use of water-based diatom mud (the picture comes from the network) What is water-based diatom mud? The water-based diatom mud is a kind of liquid wall environmental protection coating, which does not contain any harmful substances It is easy to construct, does not need to dilute, does not need to mix, and can be directly painted on the wall with even mixing It has a high rate of 94% (Laboratory) for indoor harmful and toxic substances such as formaldehyde, benzene, VOC, etc Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Paint Home News: many diatom mud products on the market are dry powder diatom mud Before, I introduced the advantages of dry powder diatom mud to you Today, Xiaobian introduces another kind of diatom mud - Water-based diatom mud Let's have a look! What is water-based diatom mud? Introduction to the use of water-based diatom mud (the picture comes from the network) What is water-based diatom mud? The water-based diatom mud is a kind of liquid wall environmental protection coating, which does not contain any harmful substances It is easy to construct, does not need to be diluted, does not need to be mixed, and can be directly painted on the wall after being stirred evenly It has a high adsorption capacity of 94% (laboratory data) for indoor harmful toxic substances such as formaldehyde, benzene, VOC, and has a strong environmental protection effect Application method of water-based diatom mud construction method: roll coating, brush coating, airless spraying remarks: when brush coating, use soap water or neutral detergent to fully clean the new wool brush before use, or directly use blue sky dolphin advanced elastic wire brush for brush coating Theoretical consumption: 3-4m2 / kg / 2 times (0.3mm dry layer); due to the different roughness of the actual construction surface putty, the consumption is also different It is strictly prohibited to mix water before use, which will affect product quality and wall effect Storage method: store in a cool and dry place at 0-35 ℃; recoat time (0.3mm for dry layer, 25-30 ℃); surface dry time: 60min; hard dry time: 120min; recoat: at least 2-3H for construction condition: do not construct in wet or cold weather (temperature is lower than 5 ℃ or higher than 35 ℃, relative humidity is higher than 85%), otherwise the expected coating effect cannot be achieved Please use it in a well ventilated place If you need to work in a closed environment, you must install ventilation device and use appropriate protective device Base material treatment: 1 New wall surface treatment: remove the dust, greasy and loose putty on the surface, and repair the pores in time to ensure that the wall is clean, dry and flat Surface state: ensure that the surface humidity of the pre coated substrate is less than 10% and the pH value is less than 10 2 Re coating the wall: surface treatment: remove the insecure paint film on the old wall, remove the dust, powder and impurities on the surface, level and polish, clean and dry thoroughly Surface condition: the surface of the precoated substrate must be firm, dry, clean, flat and free of loose substances The above content is the introduction of water-based diatom mud, I hope you like it Home of coatings focuses on the news and information of coatings, diatom mud, paint coatings, coating process, fire retardant coatings and coatings, paint coatings, coating process, decoration knowledge and decoration effect map of fire retardant coatings,